Peter,
Thanks for your guidance.
>Have you verified using a separate system that the source file you
>copied and the new file on CF are identical?
>(Please boot the system only using old files on MTD to get checksum
>on the system. Put the CF in a CF reader on another, trusted, system
>to get checksum of the copies.)
good advice. however, seems like this is not the issue.
CF card (in linux host):
[EMAIL PROTECTED] bin]$ pwd
/media/disk/bin
[EMAIL PROTECTED] bin]$ cksum scp
635934266 37864 scp
MTD:
[EMAIL PROTECTED] bin# pwd
/usr/bin
[EMAIL PROTECTED]
bin# cksum scp
635934266 37864 scp
>If it was reliably a single failure maybe dynamic linking could be
>blamed. I am not sure since you say that it sometimes takes more
>retries before the binary work.
Recently however i have been seeing single failure followed by success.
>Another matter is the CF - maybe there is a bit error and sometimes
>internal error
>correction in the CF will fix it, sometimes it gets
>the bit wrong. Are your flash cards new? Could you try more than two
>easily?
Flash card is brand new.
>It would be interesting to see ldd and strace for some binaries that
>you try to execute.
haven't been able to locate an ldd binary for arm linux on the web. will search
more.
Observations:
1. installed strace debian package. strace itself crashed first
[EMAIL PROTECTED] root# strace
Segmentation fault
[EMAIL PROTECTED] root#
strace
usage: strace [-dffhiqrtttTvVxx] [-a column] [-e expr] ... [-o file]
[-p pid] ... [-s strsize] [-u username] [-E var=val] ...
[command [arg ...]]
or: strace -c [-e expr] ... [-O overhead] [-S sortby] [-E var=val] ...
[command [arg ...]]
2. Ist RUN:
[EMAIL PROTECTED] bin# strace ./scp
execve("./scp", ["./scp"], [/* 11 vars */]) = 0
uname({sys="Linux", node="viper", ...}) = 0
brk(0) = 0x1a000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
Process 770 detached
2nd RUN:
[EMAIL PROTECTED] bin# strace ./scp
execve("./scp", ["./scp"], [/* 11 vars */])
= 0
uname({sys="Linux", node="viper", ...}) = 0
brk(0) = 0x1a000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=3740, ...}) = 0
mmap2(NULL, 3740, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40016000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/libresolv.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1a\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0$$\0\0004"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=63172, ...}) = 0
mmap2(NULL, 104476, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYW
....
bunch of other regular
stuff
....
could it be a memory mapping issue ? block size issue etc ? (although i did try
smaller partitions
as well on CF card with block size=1024 with same result)
3. Also, installation of debian perl base package fails. this fails always.
[EMAIL PROTECTED] tmp# dpkg -i perl-base_5.8.8-7etch1_arm.deb
Segmentation fault
[EMAIL PROTECTED] tmp#
4. [EMAIL PROTECTED] tmp# ldconfig
ldconfig: /usr/lib/libcpufreq.so.0 is not an ELF file - it has the wrong magic
bytes at th.
ldconfig: /usr/lib/libfontenc.so.1.0.0 is not an ELF file - it has the wrong
magic bytes a.
ldconfig: /usr/lib/libXmuu.so.1 is not an ELF file - it has the wrong magic
bytes at the s.
ldconfig: file /usr/lib/libpopt.so.0 is truncated
ldconfig: file /usr/lib/libXext.so.6.4.0 is truncated
ldconfig: /usr/lib/libXdmcp.so.6.0.0 is not an ELF file - it has the wrong
magic bytes at .
ldconfig: /usr/lib/libts-0.0.so.0
is not an ELF file - it has the wrong magic bytes at the.
ldconfig: /usr/lib/libaim104.so.0 is not an ELF file - it has the wrong magic
bytes at the.
ldconfig: /usr/lib/libXau.so.6.0.0 is not an ELF file - it has the wrong magic
bytes at th.
However, cksums for above files are same as those on MTD !
5. A bit more history: my initial intent was to use CF card as execlusive
storage with root
file system mounted on it. went down that path to only find that kernel used to
hang after
printing "freeing init memory". After putting some debugs found that /sbin/init
was crashing !
iam pretty sure that was because of the same reason as above binary crashes.
any other ideas ?
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
