hi all,

i have some issues with playback on one of my machines with different
kernels, having my rme hammerfall hdsp connected via a cardbus/pci
adapter card.

after some time (between a few seconds and several minutes) of flawless
playback, the system completely freezes, magic sysrq keys are not
functional either ... the freeze occurs with rt and non-rt kernels,
with jack running with and without realtime scheduling.

i have the suspicion, that it is related to the combination of the hdsp
with the cardbus controller of the adapter card ...

the interesting part of lspci is:
06:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
(rev 01)
        Subsystem: ENE Technology Inc CB1410 Cardbus Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fb600000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
        Memory window 0: c4000000-c7fff000 (prefetchable)
        Memory window 1: c8000000-cbfff000
        I/O window 0: 0000e000-0000e0ff
        I/O window 1: 0000e400-0000e4ff
        BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus
        Kernel modules: yenta_socket

07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev 0f)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
        Kernel driver in use: RME Hammerfall DSP
        Kernel modules: snd-hdsp

the irq 17 is used by these two devices only. i am not sure, how to
proceed debugging this, since i cannot get any useful debugging
information ...

thnx, tim

-- 
[email protected]
http://tim.klingt.org

A paranoid is a man who knows a little of what's going on.
  William S. Burroughs

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia

Reply via email to