rved, 2142k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0670000 - 0xff7fe000 ( 497 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe70000 ( 510 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575b94 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575b94 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 596.238 MHz processor. [ 0.001968] Console: colour VGA+ 80x25 [ 0.001985] console [tty0] enabled [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1192.47 BogoMIPS (lpj=2384952) [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.004000] CPU: L2 cache: 128K [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] Performance Counters: [ 0.004000] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004000] no hardware sampling interrupt available. [ 0.004000] p6 PMU driver. [ 0.004000] ... version: 0 [ 0.004000] ... bit width: 32 [ 0.004000] ... generic counters: 2 [ 0.004000] ... value mask: 00000000ffffffff [ 0.004000] ... max period: 000000007fffffff [ 0.004000] ... fixed-purpose counters: 0 [ 0.004000] ... counter mask: 0000000000000003 [ 0.004000] Checking 'hlt' instruction... OK. [ 0.017908] SMP alternatives: switching to UP code [ 0.032069] Freeing SMP alternatives: 19k freed [ 0.032493] weird, boot CPU (#0) not listed by the BIOS. [ 0.032577] SMP motherboard not detected. [ 0.032645] Local APIC not detected. Using dummy APIC emulation. [ 0.032716] SMP disabled [ 0.033547] Brought up 1 CPUs [ 0.033641] Total of 1 processors activated (1192.47 BogoMIPS). [ 0.033768] CPU0 attaching NULL sched-domain. [ 0.034941] Booting paravirtualized kernel on bare hardware [ 0.036529] regulator: core version 0.5 [ 0.036656] Time: 23:28:02 Date: 03/22/10 [ 0.036951] NET: Registered protocol family 16 [ 0.037533] EISA bus registered [ 0.045810] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 [ 0.045903] PCI: Using configuration type 1 for base access [ 0.050376] bio: create slab <bio-0> at 0 [ 0.050816] ACPI: Interpreter disabled. [ 0.051459] SCSI subsystem initialized [ 0.051811] libata version 3.00 loaded. [ 0.052285] usbcore: registered new interface driver usbfs [ 0.052433] usbcore: registered new interface driver hub [ 0.052665] usbcore: registered new device driver usb [ 0.053308] PCI: Probing PCI hardware [ 0.053387] PCI: Probing PCI hardware (bus 00) [ 0.053628] pci 0000:00:02.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.053648] pci 0000:00:02.0: reg 14 32bit mmio: [0xf4000000-0xf407ffff] [ 0.053894] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.053995] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.054139] pci 0000:00:1f.1: reg 20 io port: [0x1800-0x180f] [ 0.054239] pci 0000:00:1f.2: reg 20 io port: [0x1820-0x183f] [ 0.054344] pci 0000:00:1f.3: reg 20 io port: [0x1810-0x181f] [ 0.054442] pci 0000:00:1f.4: reg 20 io port: [0x1840-0x185f] [ 0.054513] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.054531] pci 0000:00:1f.5: reg 14 io port: [0x1880-0x18bf] [ 0.054623] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.054642] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.054764] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4104000-0xf41047ff] [ 0.054785] pci 0000:01:00.0: reg 14 32bit mmio: [0xf4100000-0xf4103fff] [ 0.054855] pci 0000:01:00.0: supports D2 [ 0.054866] pci 0000:01:00.0: PME# supported from D2 D3hot [ 0.054943] pci 0000:01:00.0: PME# disabled [ 0.055067] pci 0000:01:02.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.055103] pci 0000:01:02.0: supports D1 D2 [ 0.055113] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055192] pci 0000:01:02.0: PME# disabled [ 0.055313] pci 0000:01:02.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.055349] pci 0000:01:02.1: supports D1 D2 [ 0.055359] pci 0000:01:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055437] pci 0000:01:02.1: PME# disabled [ 0.055574] pci 0000:00:1e.0: transparent bridge [ 0.055652] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4100000-0xf41fffff] [ 0.057333] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:244c] [ 0.058058] Bluetooth: Core ver 2.15 [ 0.058440] NET: Registered protocol family 31 [ 0.058520] Bluetooth: HCI device and connection manager initialized [ 0.058597] Bluetooth: HCI socket layer initialized [ 0.058667] NetLabel: Initializing [ 0.058731] NetLabel: domain hash size = 128 [ 0.058798] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.058923] NetLabel: unlabeled traffic allowed by default [ 0.067758] pnp: PnP ACPI: disabled [ 0.067861] PnPBIOS: Scanning system for PnP BIOS support... [ 0.068103] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7470 [ 0.068190] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa88d, dseg 0x400 [ 0.069972] pnp 00:0a: io resource (0x1000-0x105f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.070089] pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.071798] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver [ 0.071921] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved [ 0.072073] system 00:01: iomem range 0x0-0x9ffff could not be reserved [ 0.072154] system 00:01: iomem range 0xe4000-0xfffff could not be reserved [ 0.072234] system 00:01: iomem range 0x100000-0x1fdfffff could not be reserved [ 0.072355] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.072435] system 00:0a: ioport range 0x1100-0x110f has been reserved [ 0.072513] system 00:0a: ioport range 0x1180-0x11bf has been reserved [ 0.072605] system 00:0c: iomem range 0xdc000-0xdffff has been reserved [ 0.072696] system 00:0d: iomem range 0xd8000-0xdbfff has been reserved [ 0.074854] AppArmor: AppArmor Filesystem Enabled [ 0.075077] pci 0000:01:02.0: CardBus bridge, secondary bus 0000:02 [ 0.075155] pci 0000:01:02.0: IO window: 0x003000-0x0030ff [ 0.075232] pci 0000:01:02.0: IO window: 0x003400-0x0034ff [ 0.075309] pci 0000:01:02.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.075388] pci 0000:01:02.0: MEM window: 0x28000000-0x2bffffff [ 0.075466] pci 0000:01:02.1: CardBus bridge, secondary bus 0000:06 [ 0.075540] pci 0000:01:02.1: IO window: 0x003800-0x0038ff [ 0.075617] pci 0000:01:02.1: IO window: 0x003c00-0x003cff [ 0.075692] pci 0000:01:02.1: PREFETCH window: 0x24000000-0x27ffffff [ 0.075772] pci 0000:01:02.1: MEM window: 0x2c000000-0x2fffffff [ 0.075849] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.075925] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.076055] pci 0000:00:1e.0: MEM window: 0xf4100000-0xf41fffff [ 0.076138] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x27ffffff [ 0.076238] pci 0000:00:1e.0: setting latency timer to 64 [ 0.076263] pci 0000:01:02.0: can't find IRQ for PCI INT A [ 0.076339] pci 0000:01:02.0: setting latency timer to 64 [ 0.076360] pci 0000:01:02.1: can't find IRQ for PCI INT B [ 0.076436] pci 0000:01:02.1: setting latency timer to 64 [ 0.076457] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.076469] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.076482] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.076494] pci_bus 0000:01: resource 1 mem: [0xf4100000-0xf41fffff] [ 0.076506] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x27ffffff] [ 0.076518] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.076529] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.076542] pci_bus 0000:02: resource 0 io: [0x3000-0x30ff] [ 0.076553] pci_bus 0000:02: resource 1 io: [0x3400-0x34ff] [ 0.076565] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.076577] pci_bus 0000:02: resource 3 mem: [0x28000000-0x2bffffff] [ 0.076589] pci_bus 0000:06: resource 0 io: [0x3800-0x38ff] [ 0.076601] pci_bus 0000:06: resource 1 io: [0x3c00-0x3cff] [ 0.076612] pci_bus 0000:06: resource 2 pref mem [0x24000000-0x27ffffff] [ 0.076625] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff] [ 0.076797] NET: Registered protocol family 2 [ 0.077321] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.078739] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.079384] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.080371] TCP: Hash tables configured (established 16384 bind 16384) [ 0.080477] TCP reno registered [ 0.081016] NET: Registered protocol family 1 [ 0.081351] Trying to unpack rootfs image as initramfs... [ 0.997327] Freeing initrd memory: 7467k freed [ 1.038171] cpufreq-nforce2: No nForce2 chipset. [ 1.038351] Scanning for low memory corruption every 60 seconds [ 1.038853] audit: initializing netlink socket (disabled) [ 1.038992] type=2000 audit(1269300483.035:1): initialized [ 1.074209] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.081859] VFS: Disk quotas dquot_6.5.2 [ 1.082261] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.085282] fuse init (API version 7.12) [ 1.085787] msgmni has been set to 990 [ 1.086958] alg: No test for stdrng (krng) [ 1.087108] io scheduler noop registered [ 1.087178] io scheduler anticipatory registered [ 1.087247] io scheduler deadline registered [ 1.087612] io scheduler cfq registered (default) [ 1.087727] pci 0000:00:02.0: Boot video device [ 1.088238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.088406] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.089465] isapnp: Scanning for PnP cards... [ 1.443750] isapnp: No Plug & Play device found [ 1.448858] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.450499] PCI: setting IRQ 5 as level-triggered [ 1.450515] serial 0000:00:1f.6: found PCI INT B -> IRQ 5 [ 1.450626] serial 0000:00:1f.6: sharing IRQ 5 with 0000:00:1f.3 [ 1.450709] serial 0000:00:1f.6: sharing IRQ 5 with 0000:00:1f.5 [ 1.455012] brd: module loaded [ 1.457481] loop: module loaded [ 1.458072] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.458691] ata_piix 0000:00:1f.1: version 2.13 [ 1.458925] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.459363] scsi0 : ata_piix [ 1.460107] scsi1 : ata_piix [ 1.460389] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 [ 1.460472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 [ 1.464765] Fixed MDIO Bus: probed [ 1.464997] PPP generic driver version 2.4.2 [ 1.465512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.465701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.465836] uhci_hcd: USB Universal Host Controller Interface driver [ 1.466084] PCI: setting IRQ 9 as level-triggered [ 1.466097] uhci_hcd 0000:00:1f.2: found PCI INT D -> IRQ 9 [ 1.466243] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 1.466257] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 1.466566] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 1.466720] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001820 [ 1.467193] usb usb1: configuration #1 chosen from 1 choice [ 1.467398] hub 1-0:1.0: USB hub found [ 1.467500] hub 1-0:1.0: 2 ports detected [ 1.467762] PCI: setting IRQ 11 as level-triggered [ 1.467776] uhci_hcd 0000:00:1f.4: found PCI INT C -> IRQ 11 [ 1.467922] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 1.467935] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 1.468248] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 1.468401] uhci_hcd 0000:00:1f.4: irq 11, io base 0x00001840 [ 1.468887] usb usb2: configuration #1 chosen from 1 choice [ 1.469085] hub 2-0:1.0: USB hub found [ 1.469189] hub 2-0:1.0: 2 ports detected [ 1.469689] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 1.472139] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.472240] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.472597] mice: PS/2 mouse device common for all mice [ 1.473017] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.473141] rtc0: alarms up to one day, 114 bytes nvram [ 1.473706] device-mapper: uevent: version 1.0.3 [ 1.474444] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 1.475103] device-mapper: multipath: version 1.1.0 loaded [ 1.475198] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.476198] EISA: Probing bus 0 at eisa.0 [ 1.476293] Cannot allocate resource for EISA slot 1 [ 1.476366] Cannot allocate resource for EISA slot 2 [ 1.476436] Cannot allocate resource for EISA slot 3 [ 1.476536] EISA: Detected 0 cards. [ 1.476940] cpuidle: using governor ladder [ 1.477019] cpuidle: using governor menu [ 1.479696] TCP cubic registered [ 1.480705] NET: Registered protocol family 10 [ 1.482797] lo: Disabled Privacy Extensions [ 1.484384] NET: Registered protocol family 17 [ 1.484566] Bluetooth: L2CAP ver 2.13 [ 1.484635] Bluetooth: L2CAP socket layer initialized [ 1.484709] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.484776] Bluetooth: SCO socket layer initialized [ 1.485046] Bluetooth: RFCOMM TTY layer initialized [ 1.485127] Bluetooth: RFCOMM socket layer initialized [ 1.485197] Bluetooth: RFCOMM ver 1.11 [ 1.485305] Using IPI No-Shortcut mode [ 1.485696] PM: Resume from disk failed. [ 1.485748] registered taskstats version 1 [ 1.486173] Magic number: 2:3:505 [ 1.486251] i8042 i8042: hash matches [ 1.486452] rtc_cmos 00:05: setting system clock to 2010-03-22 23:28:04 UTC (1269300484) [ 1.486551] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.486622] EDD information not available. [ 1.505294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.628583] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HJ02, max UDMA/33 [ 1.629437] ata1.00: ATA-5: FUJITSU MHM2100AT, 5823, max UDMA/66 [ 1.629517] ata1.00: 19640880 sectors, multi 16: LBA [ 1.644400] ata2.00: configured for UDMA/33 [ 1.645102] ata1.00: configured for UDMA/66 [ 1.645782] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHM2100A 5823 PQ: 0 ANSI: 5 [ 1.646532] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.646925] sd 0:0:0:0: [sda] 19640880 512-byte logical blocks: (10.0 GB/9.36 GiB) [ 1.647278] sd 0:0:0:0: [sda] Write Protect is off [ 1.647357] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.647498] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.648347] sda: [ 1.652554] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HJ02 PQ: 0 ANSI: 5 [ 1.664574] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.664685] Uniform CD-ROM driver Revision: 3.20 [ 1.665163] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.665410] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.666182] sda1 < sda5 sda6 > sda3 [ 1.688726] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.688896] Freeing unused kernel memory: 540k freed [ 1.692716] Write protecting the kernel text: 4568k [ 1.692963] Write protecting the kernel read-only data: 1836k [ 1.780085] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 2.107573] usb 1-2: configuration #1 chosen from 1 choice [ 2.562277] Linux agpgart interface v0.103 [ 2.875071] agpgart-intel 0000:00:00.0: Intel i815 Chipset [ 3.034636] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 3.184016] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[f4104000-f41047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.208351] PM: Starting manual resume from disk [ 4.208457] PM: Resume from partition 8:6 [ 4.208465] PM: Checking hibernation image. [ 4.209037] PM: Resume from disk failed. [ 4.284788] kjournald starting. Commit interval 5 seconds [ 4.284917] EXT3-fs: mounted filesystem with writeback data mode. [ 4.468501] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460300a53ece] [ 5.922877] type=1505 audit(1269300488.933:2): operation="profile_load" pid=299 name=/usr/share/gdm/guest-session/Xsession [ 5.998657] type=1505 audit(1269300489.009:3): operation="profile_load" pid=300 name=/sbin/dhclient3 [ 6.000813] type=1505 audit(1269300489.013:4): operation="profile_load" pid=300 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.002004] type=1505 audit(1269300489.013:5): operation="profile_load" pid=300 name=/usr/lib/connman/scripts/dhclient-script [ 6.110572] type=1505 audit(1269300489.121:6): operation="profile_load" pid=301 name=/usr/bin/evince [ 6.146379] type=1505 audit(1269300489.157:7): operation="profile_load" pid=301 name=/usr/bin/evince-previewer [ 6.167645] type=1505 audit(1269300489.177:8): operation="profile_load" pid=301 name=/usr/bin/evince-thumbnailer [ 6.267142] type=1505 audit(1269300489.277:9): operation="profile_load" pid=303 name=/usr/lib/cups/backend/cups-pdf [ 6.269850] type=1505 audit(1269300489.281:10): operation="profile_load" pid=303 name=/usr/sbin/cupsd [ 6.292645] type=1505 audit(1269300489.305:11): operation="profile_load" pid=304 name=/usr/sbin/tcpdump [ 28.509482] Adding 546168k swap on /dev/sda6. Priority:-1 extents:1 across:546168k [ 28.592025] udev: starting version 147 [ 29.286283] lp: driver loaded but no devices found [ 29.356260] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.504809] Intel 82802 RNG detected [ 30.287821] cfg80211: Calling CRDA to update world regulatory domain [ 30.482601] cfg80211: World regulatory domain updated: [ 30.482626] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 30.482641] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.482653] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.482666] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.482678] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.482691] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.027208] yenta_cardbus 0000:01:02.0: CardBus bridge found [104d:80df] [ 31.027251] yenta_cardbus 0000:01:02.0: no PCI IRQ, CardBus support disabled for this socket. [ 31.027263] yenta_cardbus 0000:01:02.0: check your BIOS CardBus, BIOS IRQ or ACPI settings. [ 31.179027] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.960283] irq 10: nobody cared (try booting with the "irqpoll" option) [ 31.960388] Pid: 447, comm: modprobe Not tainted 2.6.31-16-generic #52-Ubuntu [ 31.960400] Call Trace: [ 31.960425] [<c056ea5c>] ? printk+0x18/0x1c [ 31.960459] [<c0190ee7>] __report_bad_irq+0x27/0x90 [ 31.960475] [<c018f8fc>] ? handle_IRQ_event+0x4c/0x140 [ 31.960491] [<c01910a0>] note_interrupt+0x150/0x190 [ 31.960518] [<c0106c62>] ? mask_and_ack_8259A+0x52/0xf0 [ 31.960534] [<c0191a0c>] handle_level_irq+0xbc/0xe0 [ 31.960547] [<c01919f6>] ? handle_level_irq+0xa6/0xe0 [ 31.960562] [<c0105a38>] handle_irq+0x18/0x30 [ 31.960575] [<c0104f07>] do_IRQ+0x47/0xc0 [ 31.960588] [<c0104f10>] ? do_IRQ+0x50/0xc0 [ 31.960613] [<c0127c38>] ? default_spin_lock_flags+0x8/0x10 [ 31.960633] [<c0570e1a>] ? _spin_lock_irqsave+0x2a/0x40 [ 31.960648] [<c01039b0>] common_interrupt+0x30/0x40 [ 31.960675] [<c014b365>] ? __do_softirq+0x45/0x1a0 [ 31.960690] [<c0127c38>] ? default_spin_lock_flags+0x8/0x10 [ 31.960704] [<c0570e1a>] ? _spin_lock_irqsave+0x2a/0x40 [ 31.960719] [<c0106b92>] ? enable_8259A_irq+0x42/0x60 [ 31.960733] [<c01919f6>] ? handle_level_irq+0xa6/0xe0 [ 31.960748] [<c014b4fd>] do_softirq+0x3d/0x40 [ 31.960762] [<c014b63d>] irq_exit+0x5d/0x70 [ 31.960775] [<c0104f10>] do_IRQ+0x50/0xc0 [ 31.960788] [<c056f6c1>] ? schedule_timeout+0x131/0x200 [ 31.960803] [<c01039b0>] common_interrupt+0x30/0x40 [ 31.960820] [<c03187b1>] ? delay_tsc+0x41/0x70 [ 31.960833] [<c0318739>] __delay+0x9/0x10 [ 31.960846] [<c031876b>] __const_udelay+0x2b/0x30 [ 31.960885] [<e0b1d2a2>] yenta_get_socket_capabilities+0xf2/0x150 [yenta_socket] [ 31.960908] [<e0b1f1ce>] yenta_probe+0x2ea/0x396 [yenta_socket] [ 31.960942] [<c032853e>] local_pci_probe+0xe/0x10 [ 31.960957] [<c03292c0>] pci_device_probe+0x60/0x80 [ 31.960989] [<c03a2e70>] really_probe+0x50/0x140 [ 31.961003] [<c0570e1a>] ? _spin_lock_irqsave+0x2a/0x40 [ 31.961019] [<c03a2f79>] driver_probe_device+0x19/0x20 [ 31.961034] [<c03a2ff9>] __driver_attach+0x79/0x80 [ 31.961049] [<c03a24c8>] bus_for_each_dev+0x48/0x70 [ 31.961064] [<c03a2d39>] driver_attach+0x19/0x20 [ 31.961078] [<c03a2f80>] ? __driver_attach+0x0/0x80 [ 31.961092] [<c03a271f>] bus_add_driver+0xbf/0x2a0 [ 31.961107] [<c0329200>] ? pci_device_remove+0x0/0x40 [ 31.961122] [<c03a3285>] driver_register+0x65/0x120 [ 31.961137] [<c03294e0>] __pci_register_driver+0x40/0xb0 [ 31.961157] [<e0b24017>] yenta_socket_init+0x17/0x19 [yenta_socket] [ 31.961171] [<c010112c>] do_one_initcall+0x2c/0x190 [ 31.961191] [<e0b24000>] ? yenta_socket_init+0x0/0x19 [yenta_socket] [ 31.961219] [<c0173751>] sys_init_module+0xb1/0x1f0 [ 31.961233] [<c010336c>] syscall_call+0x7/0xb [ 31.961244] handlers: [ 31.961311] [<e06f0220>] (ohci_irq_handler+0x0/0x780 [ohci1394]) [ 31.961488] Disabling IRQ #10 [ 31.962159] yenta_cardbus 0000:01:02.0: ISA IRQ mask 0x0098, PCI irq 0 [ 31.962173] yenta_cardbus 0000:01:02.0: Socket status: 30000820 [ 31.962187] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 32.199826] phy0: Selected rate control algorithm 'minstrel' [ 32.203014] Registered led device: rt73usb-phy0::radio [ 32.203122] Registered led device: rt73usb-phy0::assoc [ 32.203199] Registered led device: rt73usb-phy0::quality [ 32.221304] usbcore: registered new interface driver rt73usb [ 32.752815] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2 [ 32.794549] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3 [ 32.848741] Intel ICH 0000:00:1f.5: found PCI INT B -> IRQ 5 [ 32.848795] Intel ICH 0000:00:1f.5: sharing IRQ 5 with 0000:00:1f.3 [ 32.848820] Intel ICH 0000:00:1f.5: sharing IRQ 5 with 0000:00:1f.6 [ 32.848894] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 32.893203] yenta_cardbus 0000:01:02.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 32.893226] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 32.893948] yenta_cardbus 0000:01:02.0: pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff [ 32.893963] yenta_cardbus 0000:01:02.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff [ 32.894512] yenta_cardbus 0000:01:02.1: CardBus bridge found [104d:80df] [ 32.894555] yenta_cardbus 0000:01:02.1: no PCI IRQ, CardBus support disabled for this socket. [ 32.894567] yenta_cardbus 0000:01:02.1: check your BIOS CardBus, BIOS IRQ or ACPI settings. [ 33.019994] yenta_cardbus 0000:01:02.1: ISA IRQ mask 0x0098, PCI irq 0 [ 33.020013] yenta_cardbus 0000:01:02.1: Socket status: 30000006 [ 33.020029] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #05 to #09 [ 33.020065] yenta_cardbus 0000:01:02.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 33.020082] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: clean. [ 33.020809] yenta_cardbus 0000:01:02.1: pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff [ 33.020823] yenta_cardbus 0000:01:02.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff [ 33.025225] pcmcia_socket pcmcia_socket0: cs: cardbus cards are not supported. [ 33.167811] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 33.169937] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 33.170904] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 33.172068] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 33.173523] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 33.267406] intel8x0_measure_ac97_clock: measured 54178 usecs (2604 samples) [ 33.267423] intel8x0: clocking to 48000 [ 33.632689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 33.634795] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 33.635871] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 33.636710] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 33.638309] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 170.810772] EXT3 FS on sda5, internal journal [ 172.095921] rt73usb 1-2:1.0: firmware: requesting rt73.bin [ 173.277175] type=1505 audit(1269297056.290:12): operation="profile_replace" pid=803 name=/usr/share/gdm/guest-session/Xsession [ 173.301159] type=1505 audit(1269297056.314:13): operation="profile_replace" pid=804 name=/sbin/dhclient3 [ 173.303361] type=1505 audit(1269297056.314:14): operation="profile_replace" pid=804 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 173.304567] type=1505 audit(1269297056.314:15): operation="profile_replace" pid=804 name=/usr/lib/connman/scripts/dhclient-script [ 173.370780] type=1505 audit(1269297056.382:16): operation="profile_replace" pid=805 name=/usr/bin/evince [ 173.451922] type=1505 audit(1269297056.462:17): operation="profile_replace" pid=805 name=/usr/bin/evince-previewer [ 173.502602] type=1505 audit(1269297056.514:18): operation="profile_replace" pid=805 name=/usr/bin/evince-thumbnailer [ 173.556343] type=1505 audit(1269297056.566:19): operation="profile_replace" pid=807 name=/usr/lib/cups/backend/cups-pdf [ 173.569107] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 173.588674] type=1505 audit(1269297056.598:20): operation="profile_replace" pid=807 name=/usr/sbin/cupsd [ 173.599327] type=1505 audit(1269297056.610:21): operation="profile_replace" pid=809 name=/usr/sbin/tcpdump [ 176.043555] ppdev: user-space parallel port driver [ 177.070262] [drm] Initialized drm 1.1.0 20060810 [ 177.097039] PCI: setting IRQ 10 as level-triggered [ 177.097056] pci 0000:00:02.0: found PCI INT A -> IRQ 10 [ 177.097123] pci 0000:00:02.0: setting latency timer to 64 [ 177.097796] [drm] Initialized i810 1.4.0 20030605 for 0000:00:02.0 on minor 0 [ 177.118307] mtrr: base(0xf8000000) is not aligned on a size(0x12c000) boundary [ 177.343725] [drm] Using v1.4 init. [ 180.660581] [drm:drm_reclaim_locked_buffers] *ERROR* reclaim_buffers_locked() deadlock. Please rework this [ 180.660596] driver to use reclaim_buffers_idlelocked() instead. [ 180.660602] I will go on reclaiming the buffers anyway. [ 235.482645] wlan0: authenticate with AP ce:3d:6a:0b:95:f8 [ 235.485484] wlan0: authenticated [ 235.485507] wlan0: associate with AP ce:3d:6a:0b:95:f8 [ 235.499946] wlan0: RX AssocResp from ce:3d:6a:0b:95:f8 (capab=0x411 status=0 aid=1) [ 235.499963] wlan0: associated [ 235.566495] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes read
_______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
