Hi
>--- a/drivers/serial/serial_cs.c
>+++ b/drivers/serial/serial_cs.c
>@@static int serial_probe(struct pcmcia_device *link)
> info->p_dev = link;
> link->priv = info;
>
>- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
>- link->io.NumPorts1 = 8;
>+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
>+ link->resource[0]->end = 8;
resource[0]->end should be end of port-address?
@@ -463,13 +463,13 @@ static int simple_config(struct pcmcia_device *link)
/* If the card is already configured, look up the port and irq */
if (link->function_config) {
unsigned int port = 0;
- if ((link->io.BasePort2 != 0) &&
- (link->io.NumPorts2 == 8)) {
- port = link->io.BasePort2;
+ if ((link->resource[1]->end != 0) &&
+ (resource_size(link->resource[1]) == 8)) {
+ port = link->resource[1]->end;
info->slave = 1;
It should be link->resource[0];
(resource_size(link->resource[0]) == 8)) {
port = link->resource[0]->end;
>static int multi_config(struct pcmcia_device *link)
> int i, base2 = 0;
>
> /* First, look for a generic full-sized window */
>- link->io.NumPorts1 = info->multi * 8;
>+ link->resource[0]->end = info->multi * 8;
> if (pcmcia_loop_config(link, multi_config_check, &base2)) {
> /* If that didn't work, look for two windows */
>- link->io.NumPorts1 = link->io.NumPorts2 = 8;
>+ link->resource[0]->end = link->resource[1]->end = 8;
> info->multi = 2;
> if (pcmcia_loop_config(link, multi_config_check_notpicky,
> &base2)) {
resource[0]->end , link->resource[1]->end should be end of port-address?
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
