bvd1 and bvd2 both default to 1 in the generic soc_common code, so
having a driver repeat this is redundant. Remove it.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/pcmcia/sa1100_shannon.c | 4 ----
drivers/pcmcia/sa1100_simpad.c | 4 ++--
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 51985c8ba830..7409cb36083b 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -32,15 +32,11 @@ shannon_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
{
switch (skt->nr) {
case 0:
- state->bvd1 = 1;
- state->bvd2 = 1;
state->vs_3v = 1; /* FIXME Can only apply 3.3V on Shannon. */
state->vs_Xv = 0;
break;
case 1:
- state->bvd1 = 1;
- state->bvd2 = 1;
state->vs_3v = 1; /* FIXME Can only apply 3.3V on Shannon. */
state->vs_Xv = 0;
break;
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index e14b2f5a18bb..b59bbe68c6d7 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -38,8 +38,8 @@ simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
{
long cs3reg = simpad_get_cs3_ro();
- state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
- state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
+ /* bvd1 might be cs3reg & PCMCIA_BVD1 */
+ /* bvd2 might be cs3reg & PCMCIA_BVD2 */
if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
(PCMCIA_VS1|PCMCIA_VS2)) {
--
2.1.0
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
