From: Markus Elfring <elfr...@users.sourceforge.net>
Date: Mon, 15 May 2017 13:50:52 +0200
The script "checkpatch.pl" pointed information out like the following.
WARNING: quoted string split across lines
Thus fix the affected source code places.
Prefer usage of the macros "pr_err" and "pr_info" over
the interface "printk".
Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>
---
drivers/pcmcia/pd6729.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index b3422119820a..841f413c0d03 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -183,8 +183,7 @@ static irqreturn_t pd6729_interrupt(int irq, void *dev)
while (1) {
loopcount++;
if (loopcount > 20) {
- printk(KERN_ERR "pd6729: infinite eventloop "
- "in interrupt\n");
+ pr_err("infinite event loop in interrupt\n");
break;
}
@@ -348,8 +347,8 @@ static int pd6729_set_socket(struct pcmcia_socket *sock,
socket_state_t *state)
break;
default:
dev_dbg(&sock->dev,
- "pd6729_set_socket called with invalid VCC power "
- "value: %i\n", state->Vcc);
+ "%s called with invalid VCC power value: %i\n",
+ __func__, state->Vcc);
return -EINVAL;
}
@@ -369,8 +368,9 @@ static int pd6729_set_socket(struct pcmcia_socket *sock,
socket_state_t *state)
reg |= I365_VPP1_12V;
break;
default:
- dev_dbg(&sock->dev, "pd6729: pd6729_set_socket called with "
- "invalid VPP power value: %i\n", state->Vpp);
+ dev_dbg(&sock->dev,
+ "%s called with invalid VPP power value: %i\n",
+ __func__, state->Vpp);
return -EINVAL;
}
@@ -597,8 +597,7 @@ static u_int pd6729_isa_scan(void)
int i;
if (irq_mode == 1) {
- printk(KERN_INFO "pd6729: PCI card interrupts, "
- "PCI status changes\n");
+ pr_info("PCI card interrupts, PCI status changes\n");
return 0;
}
@@ -641,15 +640,15 @@ static int pd6729_pci_probe(struct pci_dev *dev,
}
if (!pci_resource_start(dev, 0)) {
- dev_warn(&dev->dev, "refusing to load the driver as the "
- "io_base is NULL.\n");
+ dev_warn(&dev->dev,
+ "refusing to load the driver as the io_base is
NULL.\n");
ret = -ENOMEM;
goto err_out_disable;
}
- dev_info(&dev->dev, "Cirrus PD6729 PCI to PCMCIA Bridge at 0x%llx "
- "on irq %d\n",
- (unsigned long long)pci_resource_start(dev, 0), dev->irq);
+ dev_info(&dev->dev,
+ "Cirrus PD6729 PCI to PCMCIA Bridge at 0x%llx on irq %d\n",
+ (unsigned long long)pci_resource_start(dev, 0), dev->irq);
/*
* Since we have no memory BARs some firmware may not
* have had PCI_COMMAND_MEMORY enabled, yet the device needs it.
--
2.13.0
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
