Stephen Dowdy skrev: > But, the presumption from this, then, is that the memory is > overheating *IF* it's not some incomplete function of the BMC. > > Well, to confirm, this seems to be common on the R710s i've checked. > > lager:~# ipmitool sdr entity 8.1.0 > Temp | 0Ah | ok | 8.1 | 27 degrees C > Temp | 0Bh | ok | 8.1 | 24 degrees C > Temp | 0Ch | ucr | 8.1 | 59 degrees C > > pub:~# ipmitool sdr entity 8.1.0 > Temp | 0Ah | ok | 8.1 | 32 degrees C > Temp | 0Bh | ok | 8.1 | 32 degrees C > Temp | 0Ch | unc | 8.1 | 45 degrees C > > The last sensor is MUCH higher than the other two. > > I think someone from Dell needs to chime in on this > --stephen >
Stephen, Many thanks for your comprehensive answer, I learned some new stuff today *S* As for Dell chiming in on this, I agree. Dell ? I have recently bought a T605 for private use, which does not support entity 8.1. The same goes for a fairly new PE2900III here a work. So perhaps memory temp. readings are not entirely reliable yet? /Per -- Med venlig hilsen / Best regards IRS Denmark ApS Per Jensen IT Manager [email protected] Office Denmark: +45 70 10 29 19 Direct: +45 43 29 79 21 _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
