Hi,
I'm running into problems when trying to "mount" my storage array on node01.
INFO
Hardware:
1 - EMC AX150
2 - Dell's 1850
Software
2- CentOS 5.4_x86_64
Kernel: 2.6.18-164.el5xen
HBAnyware-4.1a36-1
EMCpower.LINUX-5.3.0.00.00-185
lpfcdriver_2.6-8.2.0.48.2p-1
I have installed this software in both servers, without any issue.
And this is working fine on node02. Everytime I start PowerPath I see
/dev/emcpowera1.
Under node01 I am lost and I can't figure anymore what I am doind wrong.
I can't see /dev/emcpowera1 as I did yesterday.
Any tip?
NODE01
[r...@node01]# powermt display dev=all
Device(s) not found.
NODE2
[r...@node02]# powermt display dev=all
Pseudo name=emcpowera
CLARiiON ID=FCNPR063600575 [hba1]
Logical device ID=60060160D7B91A00E2C08791455DDB11 [data]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats
---
### HW Path I/O Paths Interf. Mode State Q-IOs
Errors
==============================================================================
1 lpfc sdb SP A0 active alive 0
0
Thanks in advance,
Francisco
--
blog: http://sufixo.com/raw
http://www.linkedin.com/in/franciscocabrita
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
