This didn't fix anything for me. Why would you need to install firemware-tools to load the LSI driver? Was this change documented anywhere?
Josh -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Watts Sent: Monday, January 11, 2010 10:15 AM To: [email protected] Subject: Re: OpenManage 6.2 not seeing PERC 5/i on a PowerEdge 1950. On Mon, 2010-01-11 at 16:05 +0000, Mark Watts wrote: > I've got a PowerEdge 1950 (CentOS 5.4) with OpenManage 6.2.0 installed > on it. I've used the SUU 6.2 ISO to upgrade all firmware on the box. <snip> > Anyone have a clue as to why OpenManage can't see the RAID card? Typical, I hit "send" and then see a follow-up message to another thread saying to run: # yum -y install dell_ft_install Doing this and restarting fixes my problem. Mark. -- Mark Watts BSc RHCE MBCS Senior Systems Engineer, Managed Services Manpower www.QinetiQ.com QinetiQ - Delivering customer-focused solutions GPG Key: http://www.linux-corner.info/mwatts.gpg _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
