Rahul Nabar wrote:
> I dried dmidecode but cannot figure out the exact setting line I need.
>
Rahul,
FWIW, this will give you an indication of the settings of the
system's core enabled status & Symmetric Multi-Threading (SMT)/
HyperThreading (HT) settings
# dmidecode -t processor |egrep '(Socket Des|Version|Core|Thread)'
Socket Designation: CPU1
Version: Intel(R) Xeon(R) CPU X5550 @ 2.67GHz
Core Count: 4
Core Enabled: 4
Thread Count: 8
Socket Designation: CPU2
Version: Intel(R) Xeon(R) CPU X5550 @ 2.67GHz
Core Count: 4
Core Enabled: 4
Thread Count: 8
This shows two sockets, each with X5550 cpus, all cores (4)
enabled on each and SMT enabled (twice as many threads as cores)
For Windows:
C:\> WMIC CPU Get Name, NumberOfCores, NumberOfLogicalProcessors /format:list
Name=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
NumberOfCores=4
NumberOfLogicalProcessors=4
These obviously can't be used to set/change the values, use sysdtk or
activateCmosToken, as Tim Small says.
--stephen
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
