How are you supposed to clear the configuration on a disk previously
used on a PERC 5/i?


# omconfig storage controller action=clearforeignconfig controller=0
Command successful!

# omconfig storage pdisk action=clear controller=0 pdisk=0:0:1
Operation disabled. Read, action=clear

# omreport storage pdisk controller=0
List of Physical Disks on Controller PERC 5/i Integrated (Embedded)

Controller PERC 5/i Integrated (Embedded)
ID                        : 0:0:0
Status                    : Ok
Name                      : Physical Disk 0:0:0
State                     : Online
Failure Predicted         : No
Progress                  : Not Applicable
Bus Protocol              : SAS
Media                     : HDD
Capacity                  : 67.75 GB (72746008576 bytes)
Used RAID Disk Space      : 67.75 GB (72746008576 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare                 : No
Vendor ID                 : DELL    
Product ID                : ST373455SS      
Revision                  : S513
Serial No.                : 3LQ0YQ5T            
Negotiated Speed          : Not Available
Capable Speed             : Not Available
Manufacture Day           : 07
Manufacture Week          : 18
Manufacture Year          : 2005
SAS Address               : 5000C50004901BC5

ID                        : 0:0:1
Status                    : Non-Critical
Name                      : Physical Disk 0:0:1
State                     : Foreign
Failure Predicted         : No
Progress                  : Not Applicable
Bus Protocol              : SAS
Media                     : HDD
Capacity                  : 67.75 GB (72746008576 bytes)
Used RAID Disk Space      : 0.00 GB (0 bytes)
Available RAID Disk Space : 67.75 GB (72746008576 bytes)
Hot Spare                 : No
Vendor ID                 : DELL    
Product ID                : ST373455SS      
Revision                  : S513
Serial No.                : 3LQ0XWSY            
Negotiated Speed          : Not Available
Capable Speed             : Not Available
Manufacture Day           : 07
Manufacture Week          : 18
Manufacture Year          : 2005
SAS Address               : 5000C50004901BA1


Mark.

-- 
Mark Watts BSc RHCE MBCS
Senior Systems Engineer, Managed Services Manpower
www.QinetiQ.com
QinetiQ - Delivering customer-focused solutions
GPG Key: http://www.linux-corner.info/mwatts.gpg

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

Reply via email to