Hello, I have an LSI RAID card on my Dell PowerEdge R410 with an LSI RAID card:
[r...@host httpd]# lspci | grep LSI 02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) [r...@host httpd]# lsmod | grep mega megaraid_sas 73404 0 scsi_mod 196697 9 megaraid_sas,scsi_dh,sr_mod,sg,libata,mptsas,mptscsih,scsi_transport_sas ,sd_mod [r...@host httpd]# I am trying to use the MegaCli but it doesn't print anything: [r...@rhn-dev httpd]# /opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -L0 -aALL Exit Code: 0x00 [r...@rhn-dev httpd]# /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aALL Exit Code: 0x00 [r...@rhn-dev httpd]# Am I using the right command line utility? Is there any other way to monitor the RAID arrays? Any help will be greatly appreciated. Thanks in advance. ------------ Wadud Miah Scientific Computing Systems Support, eScience Rutherford Appleton Laboratory, STFC 01235 446 794 ------------ -- Scanned by iCritical. _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
