On Tue, Mar 02, 2010 at 03:37:44PM +0100, Trond Hasle Amundsen wrote: > > I found this: > > http://support.dell.com/support/downloads/format.aspx?c=us&cs=555&l=en&s > > =biz&deviceid=2331&libid=36&releaseid=R251021&vercnt=3&formatcnt=0&Syste > > mID=PWE_M610&servicetag=&os=RHEL5&osl=en&catid=-1&dateid=-1&typeid=-1&fo > > rmatid=-1&impid=-1&checkFormat=true > > > > Which I got to by going to http://support.dell.com, selecting > > Enterprise, searched by HW type, chose a M610, selected RHEL 5, then > > went to the System Management section, and found OM. > > Yeah, but this is OM. I'm looking for the MIBs associated with it, > titled "MIBs for PowerEdge", currently available in version 6.0.1. > > Version 6.0.1 of the MIBs is not new enough. For example, a physical > drive can (tested with OM 6.2.0.1) have a state "Replacing" as reported > by omreport. Via SNMP this corresponds to the value "22", which is not > defined in the MIBs.
Why not just use the MIB files delivered with OMSA? I've got these in an OMSA 6.1 install: /opt/dell/srvadmin/sm/mibs/dcstorag.mib /opt/dell/srvadmin/omsa/mibs/dcs3fru.mib /opt/dell/srvadmin/omsa/mibs/10892.mib And 6.2 has these: /opt/dell/srvadmin/etc/srvadmin-isvc/mib/10892.mib /opt/dell/srvadmin/etc/srvadmin-isvc/mib/dcs3fru.mib /opt/dell/srvadmin/etc/srvadmin-storage/dcstorag.mib Tino. PS: I've never looked at the downloadable MIBs... -- "What we nourish flourishes." - "Was wir nähren erblüht." www.lichtkreis-chemnitz.de www.tisc.de _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
