So if i understand right i have to clear the log. How do i do that? Regards, rene rosenberger Von: [email protected] [mailto:[email protected]] Gesendet: Donnerstag, 18. März 2010 10:30 An: Rene Rosenberger; [email protected] Betreff: RE: OMSA ECC single bit correction logging disabled That means that to many SBEs occur in a too short period of time. (Single bit errors in a Dimm => the dimm slot is mentioned in the HW log you can access through bmc, drac, OMSA) To avoid a log spam the logging for SBEs was disabled until the log was cleared and a reboot was done. IF you use a Generation 9 server check the System Bios if it is 2.61. If possible (downtime) x-test the dimm with another to check if the error follows the dimm and to isolate the slot. If you cant x-test and the bios and bmc is up to date open a HW call. From: [email protected] [mailto:[email protected]] On Behalf Of Rene Rosenberger Sent: Thursday, March 18, 2010 10:23 AM To: linux-poweredge-Lists Subject: OMSA ECC single bit correction logging disabled Hi, what does it mean and how do i fix it? Regards, Rene Rosenberger
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
