I have a PE2850 with two connections to the SAN, with multipathing set up: [r...@ccvobtest2850 network-scripts]# multipath -ll DubSanGrp01VolCC (36090a048d03f308d51b1f47c000030a6) dm-18 EQLOGIC,100E-00 [size=500G][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 3:0:0:0 sdc 8:32 [active][ready] \_ 4:0:0:0 sdd 8:48 [active][ready]
My connections to the san are eth1 and eth2 When I ifdown eth2, both paths stay up. However if I ifdown eth1, one path goes down and the other stays up. If I *then* down eth2 it goes down also. Any ideas why this may be happening? Seems a bit weird The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. If you are not the intended addressee please contact the sender and dispose of this e-mail. Thank you.
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
