Hi Mark,

I have seen this before and we found it was the LCD display cable had worked 
loose, reseating the cable resolved the issue. It may not be the same problem 
you are having though. Its cable 2 on diagram 3-25 on the link below:

http://support.euro.dell.com/support/edocs/systems/pe1950/en/hom/html/install.htm#wp1108856

Its best to be careful though, the cable connects to a ZIF socket and they can 
be delicate.

Cheers,

David.

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Mark Watts
Sent: 13 April 2010 14:53
To: Weilnau, Wayne
Cc: linux-poweredge-Lists
Subject: RE: PowerEdge 1950 LCD display

On Tue, 2010-04-13 at 08:24 -0500, [email protected] wrote:
> Mark, Its been a while since I looked at a 1950, but I believe there 
> is  a setting that controls LCD message behavior.  I believe there are  
> options to set it to off, default (display model and error messages),  
> or custom message.  This setting is probably in BIOS setup (F2) but  
> may be in the DRAC/BMC option ROM (CTRL-E).  In general, the LCD will  
> only show failure messages.  I'm not sure if a power supply removal  
> would fall into that category.  You could unplug a fan as another  
> test.

Yeah, I've gone through the three options (None, Default, User-Defined) and 
they don't change anything. Ctrl-E doesn't have any related options.

The 1950 next to it in the rack (they should be the same hw config) is showing 
a PSU Redundancy failure with one PSU unplugged, so this server should do the 
same.

Any other ideas? I see a little reset(?) switch that looks like it needs a 
paper clip to use - is that a real system reset or does it do the LCD by any 
chance?

Mark.

--
Mark Watts BSc RHCE MBCS
Senior Systems Engineer, Managed Services Manpower www.QinetiQ.com QinetiQ - 
Delivering customer-focused solutions GPG Key: 
http://www.linux-corner.info/mwatts.gpg
Dell Corporation Limited is registered in England and Wales. Company 
Registration Number: 2081369
Registered address: Dell House, The Boulevard, Cain Road, Bracknell,  
Berkshire, RG12 1LF, UK.
Company details for other Dell UK entities can be found on  www.dell.co.uk.

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
Dell Corporation Limited is registered in England and Wales. Company 
Registration Number: 2081369
Registered address: Dell House, The Boulevard, Cain Road, Bracknell,  
Berkshire, RG12 1LF, UK.
Company details for other Dell UK entities can be found on  www.dell.co.uk.

Reply via email to