When I run update_firmware in a kickstart postscript, the updates claim to install, but after reboot the firmware hasn't changed. Yet, when I run the same commands from the CLI after first boot, the firmware updates and stays updated.
The code I'm using is: yum -y install dell_ft_install # Set the firmware to auto-install sed -i 's/rpm_mode=manual/rpm_mode=auto/g' /etc/firmware/firmware.conf yum -y install $(/usr/sbin/bootstrap_firmware) /usr/sbin/update_firmware -yv After first boot, I only run update_firmware -yv (or sometimes, both of the last two lines). Am I doing something wrong or is something broken? Thanks, Ali Tayarani
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
