Is anyone using Freebsd 8 successfully on R710s w/ PERC H700 in a raid 5 ? We've got 6 1TB sata's configured in a raid 5 on the H700.
I've been getting page faults and kernel panics recently and would like some pointers to figuring out what's happening . I've fsck'd -y partitions upon reboot as required to bring the system back. Freebsd is using the mfi driver. uname -a FreeBSD myhost 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0: Tue Jan 5 21:11:58 UTC 2010 [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 Output from the last 3 crashes: >From April 7 ... mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed Fatap trap 12: page fault while in kernel mode cpuid = 4; apic id = 14 fault virtual address = 0x.... fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff807c0320 stack pointer = 0x20:0xffffff80ed267800 frame pointer = 0x20:0xffffff80ed267820 code setment = base 0x0, limit 0xfffff, type -x1b = DPL 0 , pres 1, long 1, def32 -, gran 1 processer eflags = interrupt enabled, resume, IOPL = 0 current process = 23357 (mysqld) trap number = 12 panic:page fault cipid = 4 uptime: 27d20h55m41s Cannot dump. Device not defined or unavailable. Automatic reboot in 15 seconds - press a key on the console to abort april 11 2010 ... mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed g_vfs_done():mfid0s1e[READ(offset=4873750505857353728, length=2048)]error = 5 g_vfs_done():mfid0s1e[READ(offset=4873750505857353728, length=2048)]error = 5 g_vfs_done():mfid0s1e[READ(offset=4873750505857353728, length=2048)]error = 5 g_vfs_done():mfid0s1e[READ(offset=-143103637480472576, length=16384)]error = 5 bad block -5764607248143728769, ino 1651117 dev = mfid0s1e, ino = 1651117, fs = /usr panic: ffs_freefile: freeing free inode cpuid = 0 Uptime: 3d18h2m0s Cannot dump. Device not defined or unavailable. Automatic reboot in 15 seconds - press a key on the console to abort April 29 ... mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed dev = mfid1p1, block = 1537540096, fs = /local panic: ffs_blkfree: freeing free block cpuid = 9 Uptime: 11d0h53m47s Physical memory: 8168 MB Dumping 2401 MB ** DUMP FAILED (ERROR 16) ** Automatic reboot in 15 seconds - press a key on the console to abort May 2 ... mfi0: Copy out failed mfi0: Copy out failed mfi0: Copy out failed panic: ufs_dirbad: /usr: bad dir ino 1271883 at offset 80: mangled entry cpuid = 3 Uptime: 2d10h42m28s Physical memory: 8168 Dumping 1912 MB: any hlp apprec, -L
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
