On 2010-04-23 02:46, [email protected] wrote: > > > > omconfig storage adisk action=assignglobalhotspare controller=id > adisk=<ARRAYFESTPLATTEN-ID> assign=<yes|no> > > yours: (omconfig storage pdisk action=assignglobalhotspare \ > controller=0 pdisk=0:0:2 assign=no) > > Your syntax looks fine => only the \ in each command I don't understand. > Please just try it with adisk too => the commands should be work on a > Perc 6 or anything is buggy with OMSA. > > The reconfigure syntax looks also fine for both vd's. > > The Other Patrick is also right, if the webservice is running connect to > the GUI from remote if your linux has cli only. It is more comfortable. > > OMSA: https://host_ip:1311 > - choose storage - Perc - VD - the tasks for the VD and choose > reconfigure => if the aditional disks are in state ready the wizard > guide you > >
The \ just indicates that the command continues on the next line. I believe my syntax was correct for my version of OMSA but never did work. I was able to use the web interface to preform the action without any trouble. I recently came across another situation in which omconfig would not do its job, but the web interface would. [r...@myserver ~]# omconfig storage pdisk action=assignglobalhotspare \ assign=no controller=1 pdisk=1:0:14 Operation disabled. Read, action=assignglobalhotspare assign=no .Refer to the documentation for more information. The web interface let me do that same operation with no trouble. This is OSMA 6.2.0 on a Perc 6/e on Centos 5.4 Any idea why omconfig would not work? -- Jeremy Smith Systems Administrator eSilo, LLC.
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
