Hi.
I wonder if there is someone else that has experienced packetloss when
the port connecting the iDRAC for the blades have been trunked/tagged?
The CMC module responds as it should, but i get masive packetloss when i
try to ping the iDRAC interfaces on my bladeservers.
I also recieve duplicate responses when i ping my iDRAC interfaces.
My network config:
Router
/ \
Switch1 Switch2
\ /
Switch3
/ \
(standby) CMC1 CMC2 (active)
Any ideas? Am I doing anything wrong?
Im using vlanid 15 for the management, and has the CMC ports tagged for
that vlan.
I also have an ISL between switch1 and switch2 and vlan15 is tagged
there aswell.. as on the uplinks to the router.
.143 is the iDRAC on BLADE#1
.142 is the CMC modules.
64 bytes from x.y.255.143: icmp_seq=1 ttl=64 time=0.451 ms
64 bytes from x.y.255.143: icmp_seq=1 ttl=64 time=0.487 ms (DUP!)
64 bytes from x.y.255.143: icmp_seq=2 ttl=64 time=0.382 ms
^C
--- x.y.255.143 ping statistics ---
7 packets transmitted, 2 received, +1 duplicates, 71% packet loss, time
6000ms
rtt min/avg/max/mdev = 0.382/0.440/0.487/0.043 ms
64 bytes from x.y.255.142: icmp_seq=1 ttl=64 time=0.236 ms
64 bytes from x.y.255.142: icmp_seq=2 ttl=64 time=0.177 ms
64 bytes from x.y.255.142: icmp_seq=3 ttl=64 time=0.222 ms
^C
--- x.y.255.142 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.177/0.211/0.236/0.030 ms
Kind Regards
M
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
