On Thu, May 20, 2010 at 1:01 PM, Jefferson Ogata <[email protected]> wrote: > 2. In BMC setup (control-E during POST), enable serial over LAN, set IP > and password. > > ** First thing you should do in BMC setup is reset to default. The BMCs > often ship with a weird non-default setting that will cause lots of > serial port feedback if you try to run a getty on the serial console.
Is it possible to do this step in an automated fashion? i.e. without using the Manual Ctrl+E? Would ipmitool, or syscfg or another equivalent tool have the way of setting the BMC SOL? I already set the BMC's IP and pasword using ipmitool. I have ~300 machines so doing this step manually via Ctrl+E is tedious. -- Rahul _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
