Hi list, I bought a shiny new MD1200 and a PERC H800 controller and installed the controller on a non-DELL system running openSUSE 11.3. Anyone running OMSA and openSUSE 11.3 here? And non-DELL servers with PERC controllers?
But OMSA shows under "Storage" just "No storage controllers detected.". I can see my RAID disk with fdisk: # fdisk -l /dev/sdb Disk /dev/sdb: 19998.4 GB, 19998441472000 bytes 255 heads, 63 sectors/track, 2431338 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table How can I make OMSA find or recognize the controller? Many thanks for any help! Richard -- Richard Ems mail: [email protected] Cape Horn Engineering S.L. C/ Dr. J.J. Dómine 1, 5º piso 46011 Valencia Tel : +34 96 3242923 / Fax 924 http://www.cape-horn-eng.com _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
