ready. !!!!
I just installed libsmbios2_2.2.13-0ubuntu2_amd64.deb it's works without
problem on debian lenny
antica-db4:~/omsa# cat /etc/debian_version
5.0.5
antica-db4:~/omsa# /opt/dell/srvadmin/bin/omreport storage controller
Controller PERC H700 Modular (Embedded)
Controllers
ID : 0
Status : Non-Critical
Name : PERC H700 Modular
Slot ID : Embedded
State : Degraded
Firmware Version : 12.3.0-0032
Minimum Required Firmware Version : Not Applicable
Driver Version : 00.00.04.01
Minimum Required Driver Version : 00.00.04.17
Storport Driver Version : Not Applicable
Minimum Required Storport Driver Version : Not Applicable
Number of Connectors : 1
Rebuild Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruct Rate : 30%
Alarm State : Not Applicable
Cluster Mode : Not Applicable
SCSI Initiator ID : Not Applicable
Cache Memory Size : 512 MB
Patrol Read Mode : Auto
Patrol Read State : Stopped
Patrol Read Rate : 30%
Patrol Read Iterations : 0
Abort Check Consistency on Error : Disabled
Allow Revertible Hot Spare and Replace Member : Enabled
Load Balance : Auto
Auto Replace Member on Predictive Failure : Disabled
Redundant Path view : Not Applicable
Persistent Hot Spare : Disabled
Security Capable : Yes
Security Key Present : No
Spin Down Unconfigured Drives : Disabled
Spin Down Hot Spares : Disabled
David Lopez wrote:
And i have installed smbios utility
antica-db4:~/omsa# dpkg -l|grep smbios
ii libsmbios-bin 2.0.3.dfsg-1
Provide access to (SM)BIOS information -- ut
ii libsmbios2 2.0.3.dfsg-1
Provide access to (SM)BIOS information -- dy
2010/9/22 David Lopez <[email protected] <mailto:[email protected]>>
this is the list:
ii compat-libstdc 5-1
libstdc++5.so for srvadmin-storelib
ii srvadmin-all 6.3.0-1
Meta package for installing all Server Admin
ii srvadmin-base 6.3.0-1
Meta package for installing the Server Agent
ii srvadmin-deng 5.9.3-1
Dell OpenManage Data Engine
ii srvadmin-hapi 5.9.3-1
Dell OpenManage Hardware Abstraction Program
ii srvadmin-idrac 6.3.0-1
Meta RPM for iDRAC
ii srvadmin-idrac-ivmcli 1.0.0-1
CLI utils from the management station to the
ii srvadmin-idrac-vmcli 1.0.0-1
CLI utils from the management station to the
ii srvadmin-idracadm 6.3.0-1
The command line user interface to the Remot
ii srvadmin-isvc 5.9.3-1
Dell OpenManage Instrumentation Services
ii srvadmin-iws 4.3.0-1
Secure Port Server and Server Administrator
ii srvadmin-jre 1.6.17-1
SUN Java Runtime Environment
ii srvadmin-omacore 4.3.0-1
Server Administrator Core and CLI
ii srvadmin-omcommon 6.3.0-1
Dell OpenManage Server Administrator Common
ii srvadmin-omilcore 6.3.0lenny
Dell OpenManage Server Administrator Install
ii srvadmin-rac-components 6.3.0-1
Remote Access Controller SNMP components for
ii srvadmin-rac4 4.6.5-1
Meta package that pulls in all required depe
ii srvadmin-rac4-populator 4.6.5-1
Remote Access Controller data populator comp
ii srvadmin-rac5 6.3.0-1
sample reimplemented package for data engine
ii srvadmin-racadm4 4.6.5-1
The command line user interface to the Remot
ii srvadmin-racadm5 6.3.0-1
The command line user interface to the Remot
ii srvadmin-racdrsc 6.3.0-1
Remote Access CLI and Web Plugin to Server A
ii srvadmin-racsvc 4.6.5-1
Remote Access Controller (RAC) services supp
ii srvadmin-smcommon 3.3.0-1
Storage Management common files for GUI and
ii srvadmin-smweb 3.3.0-1
Storage Management package for GUI component
ii srvadmin-storage 3.3.0-1
Storage Management accessors package
ii srvadmin-storage-populator 3.3.0-1
Storage Management populator package
ii srvadmin-storelib 6.3.0-1
StoreLib package for storage management
ii srvadmin-storelib-sysfs 2.1.0-1
System Utilities Package/Libsysfs for LSI st
ii srvadmin-sysfsutils 1.3.0-1
Storage Management System Utilities Package
ii srvadmin-webserver 6.3.0-1
Meta package for installing the Server Admin
ii srvadmin-xmlsup 2.4.0-1
Dell OpenManage XML Support SDK
2010/9/22 David Lopez <[email protected] <mailto:[email protected]>>
Hi everyone.
I just install all package that conform OMSA6.3, bun it still
show me an error from
antica-db4:~/omsa# /opt/dell/srvadmin/bin/omreport storage
controller
No controllers found
This is the list of package a just installed on debian lenny
When i start the daemon iget a error
antica-db4:~/omsa# /etc/init.d/dataeng start
/usr/sbin/smbios-sys-info-lite does not exist. Not able to
proceed.
Starting Systems Management Data Engine:
Failed to start because system is not supported
Perhaps i just to create the files smbios-sys-info-lite?
2010/9/14 David Lopez <[email protected]
<mailto:[email protected]>>
Thanks everyone for yours answer.
I try to convert the rpm (OMSA 6.3) to deb for install
this package on debian lenny.
For other way, i found this link that have OMSA 6.3 but
for ubuntu. Perhaps it work on debian lenny, i try.
http://linux.dell.com/repo/community/deb/OMSA_6.3/
2010/9/14 Anwar Maharban <[email protected]
<mailto:[email protected]>>
Yes i know, but there are no OMSA installers for
Debian other then the
6.1 by SARA and 6.3 by Dell.
So 6.3 is the first version that is supporting H700 on
Debian machines,
that is what i ment.
Cheers,
-Anwar
On 9/14/2010 1:59 PM, [email protected] wrote:
> H700 Controller (PERC 7 series) support was
introduced with OM6.2.
> Hence, you will need to have OM6.2 or above to be
able to manage and
> monitor H700 controllers from OM.
>
> Thanks.
>
> --
> Gagan
>
>
> -----Original Message-----
> From: [email protected]
<mailto:[email protected]>
> [mailto:[email protected]
<mailto:[email protected]>] On Behalf
Of Anwar Maharban
> Sent: Tuesday, September 14, 2010 5:24 PM
> To: linux-poweredge-Lists
> Subject: Re: perc h700 debian lenny "No controllers
found"
>
>
> Hi,
>
> OMSA 6.0 can't see the H700 controller, OMSA 6.3
however can.
> Perhaps you should consider using 6.3 instead.
> Though, i have only got it to work on Debian Squeeze
which is testing..
> also i had to install some packages from Ubuntu to
get it to work.
> But atleast it did the job and the H700 controller
was managable through
>
> the web-interface.
>
> Just my 2 cents :)
>
> Anwar Maharban
>
> On 9/14/2010 12:02 PM, Richard Ems wrote:
>> Hi David,
>>
>> why are you using the older 6.0 version?
>> Can't you try the latest 6.3 version?
>>
>> Richard
>>
>>
>> On 09/13/2010 08:38 PM, David Lopez wrote:
>>> Hi everyone,
>>>
>>> I just have intalled dellomsa 6.0.1-9 on an Debian
lenny (Linux
>>> antica-db2 2.6.32-bpo.5-amd64).
>>>
>>> ii dellomsa
>>> 6.0.1-9 Dell OpenManage Server
Administrator 5.
>>>
>>> But when run the command "omreport storage
controller", it not show
> me
>>> anything, only "No controllers found".
>>>
>>> Any help, thank you
>>>
>>>
>>> --
>>> Saludos
>>> David Lopez
>>> ANTICA S.A.
>>> Av. Santa Maria 2810 piso 3,
>>> Providencia, Santiago, Chile.
>>> +5624341841
>>> +56978470262
>>>
>>>
>>>
>>> _______________________________________________
>>> Linux-PowerEdge mailing list
>>> [email protected]
<mailto:[email protected]>
>>>
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>>> Please read the FAQ at http://lists.us.dell.com/faq
> _______________________________________________
> Linux-PowerEdge mailing list
> [email protected]
<mailto:[email protected]>
>
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
_______________________________________________
Linux-PowerEdge mailing list
[email protected] <mailto:[email protected]>
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
--
Saludos
David Lopez
ANTICA S.A.
Av. Santa Maria 2810 piso 3,
Providencia, Santiago, Chile.
+5624341841
+56978470262
--
Saludos
David Lopez
ANTICA S.A.
Av. Santa Maria 2810 piso 3,
Providencia, Santiago, Chile.
+5624341841
+56978470262
--
Saludos
David Lopez
ANTICA S.A.
Av. Santa Maria 2810 piso 3,
Providencia, Santiago, Chile.
+5624341841
+56978470262
--
Saludos
David Lopez
ANTICA S.A.
Av. Santa Maria 2810 piso 3,
Providencia, Santiago, Chile.
+5624341841
+56978470262
--
Saludos
David Lopez
ANTICA S.A.
Av. Santa Maria 2810 piso 3,
Providencia, Santiago, Chile.
+5624341841
+56978470262
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
