[also posted on [email protected]]
Hi,
I am setting up a new Dell T610 server with 8 WD Black Caviar sata3 1TB
disks on a LSISAS2008 controller:
Oct 21 09:12:37 grml kernel: [ 83.377388] mpt2sas0: LSISAS2008:
FWVersion(02.1
5.63.00), ChipRevision(0x02), BiosVersion(07.01.09.00)
My layout is as follows:
- small un-encrypted raid1 boot partition on /dev/md0
- dm-crypt main partition on /dev/md1 (actuallly /dev/mapper/cmd1)
A recent grml64 is used to create the partitions, install the system and
run lilo.
When running lilo I get these errors from the controller:
Oct 21 08:57:11 grml kernel: [40832.015207] mpt2sas0:
fault_state(0x265d)!
Oct 21 08:57:11 grml kernel: [40832.015210] mpt2sas0: sending diag
reset !!
Oct 21 08:57:12 grml kernel: [40833.209839] mpt2sas0: diag reset:
SUCCESS
Oct 21 08:57:12 grml ata_id[3570]: HDIO_GET_IDENTITY failed for
'/dev/sde'
Oct 21 08:57:13 grml kernel: [40833.407078] mpt2sas0: LSISAS2008:
FWVersion(02.15.63.00), ChipRevision(0x02), BiosVersion(07.01.09.00)
Oct 21 08:57:13 grml kernel: [40833.407084] mpt2sas0: Dell PERC H200
Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
Oct 21 08:57:13 grml kernel: [40833.407087] mpt2sas0:
Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag
Trace Buffer,Task Set Full,NCQ)
etc.. and then all disks are kicked out of /dev/md1:
Oct 21 08:57:20 grml kernel: [40840.361581] md: super_written gets
error=-5, uptodate=0
Oct 21 08:57:20 grml kernel: [40840.361586] md/raid:md1: Disk failure
on sdd2, disabling device.
Oct 21 08:57:20 grml kernel: [40840.361587] <1>md/raid:md1: Operation
continuing on 0 devices.
But on another attempt /dev/md0 was stopped as well.
Any suggestion on fixing that problem would be welcome. I can send more
complete logs.
Thanks,
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
