If you install firmware-nonfree it should see the bnx2 NICs. You may have to use backports (makes installing hard) or specify a driver for it to detect the raid controller though, depends on which controller you have.
I'd just run squeeze, everything should work there and hopefully it will be the stable release by the end of the year (wishful thinking I'm sure) but it depends on your requirement. Mark -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Drew Weaver Sent: Tuesday, November 02, 2010 10:33 AM To: 'Hermidio A. Rodriguez Chavez'; [email protected] Subject: RE: PowerEdge T710 It probably also will not see your NIC card. We gave up on Debian. -Drew -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Hermidio A. Rodriguez Chavez Sent: Monday, November 01, 2010 4:49 PM To: [email protected] Subject: PowerEdge T710 Hi all, Thanks in advance. i have this dell server and i like install debin Lenny on it, i have configured a RAID 0 enviroment but when the OS install arrive to the disc detec, it say that isn't a hard disc. I need extra driver for it? Please Help Me. Hermidio _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq ______________________________________________ See http://www.peak6.com/email_disclaimer.php for terms and conditions related to this email _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
