On Wed, Nov 17, 2010 at 08:27:13AM +0000, Andrew Lyon wrote: > Hi, > > As I previously mentioned I am working on a set of ebuilds for > installing OMSA onto Gentoo linux, I've now tested my ebuilds and on > the r200 server where I did the initial development they work > perfectly, however on two other systems one of which is also a R200 > several sections are missing from the navigation tree on the left, > normally it looks like this: > > System > |-Main System Chassis > |-BIOS > |-Fans > |-Firmware > |-Intrusion > |-Memory > |-Network > |-Ports > |-Power Supplies > |-Processors > |-Remote Access > |-Slots > |-Temperatures > |-Voltages > > But when its broken: > > System > |-Main System Chassis > |-BIOS > |-Memory > |-Network > |-Ports > |-Processors > |-Slots > > What would cause these to be missing?
You're missing all the stuff traditionally provided by IPMI. -- Matt Domsch Technology Strategist Dell | Office of the CTO _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
