Good call. I shut it down (and pulled power cords). When I brought it back up the CPU was being reported in iDRAC and OMSA normally. Thanks!
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Adams Sent: Monday, February 1, 2016 12:54 PM To: [email protected] Subject: Re: [Linux-PowerEdge] 2nd CPU status is Unknown Once upon a time, Chris Lajoie <[email protected]> said: > That had no effect. I also tried rebooting the server, which also had no > effect. > I also opened up the iDRAC web interface and I do not see the 2nd CPU at all! > It reports as if I only have 1 CPU installed. > Should I try to reseat the CPU in the socket? I'm at a loss here. While it's > working fine right now I wouldn't consider putting a server in production > like this. Have you fully power-cycled it? I wonder if the iDRAC just isn't re-inventorying the hardware at some level. I wouldn't think re-seating the CPU would have any effect; if the OS sees it and uses it (without crashing or anything weird) it should be fine. -- Chris Adams <[email protected]> _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
