Hi Chandra,
not the whole log, but I ran a tail -f during startup.
There is not much information logged during the startup:
Apr 29 14:05:13 XX instsvcdrv: dell_rbu device driver loaded
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: new high speed USB device number 77
using ehci_hcd
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: New USB device found, idVendor=0624,
idProduct=0250
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: New USB device strings: Mfr=4,
Product=5, SerialNumber=6
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: Product: Mass Storage Function
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: Manufacturer: Avocent
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: SerialNumber: 20120731
Apr 29 14:07:49 XX kernel: usb 1-1.6.2: configuration #1 chosen from 1 choice
Apr 29 14:07:49 XX kernel: scsi3438 : SCSI emulation for USB Mass Storage
devices
Apr 29 14:07:50 XX kernel: scsi 3438:0:0:0: Direct-Access iDRAC SECUPD
0329 PQ: 0 ANSI: 0 CCS
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: Attached scsi generic sg1 type 0
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: [sdb] 2112 512-byte logical blocks:
(1.08 MB/1.03 MiB)
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: [sdb] Write Protect is off
Apr 29 14:07:50 XX kernel: sd 3438:0:0:0: [sdb] Assuming drive cache: write
through
Apr 29 14:07:51 XX kernel: sd 3438:0:0:0: [sdb] Assuming drive cache: write
through
Apr 29 14:07:51 XX kernel: sdb:
Apr 29 14:07:51 XX kernel: sd 3438:0:0:0: [sdb] Assuming drive cache: write
through
Apr 29 14:07:51 XX kernel: sd 3438:0:0:0: [sdb] Attached SCSI removable disk
Regards,
Stefan
> Hi Stefan,
>
> Please share us the /var/log/messages while starting the OMSA services.
>
> Regards
> Chandra
>
> -----Original Message-----
> From: Dietrich, Stefan [mailto:[email protected]]
> Sent: Friday, April 29, 2016 4:12 PM
> To: Bose, Souvik
> Cc: R, Chandrasekhar ; linux-poweredge-Lists
> Subject: Re: OMSA 8.3.0 not starting or segfaulting
>
> Yes, this line is commented out in our current deployment.
> As I said, most of the machines are working.
> There is just a bunch of machines, were OMSA refuses to work.
>
>> Dell - Internal Use - Confidential
>> Did you comment out loading psrvil library in stsvc.ini file?
>>
>> Thanks
> > Souvik
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
