Hi, RHEL 7.2, SLES 12 SP1 and SLES 11 SP4 have support for S130. Support here means that S130 provides pre-boot configuration options to configure md raid VD in BIOS environment and boot from the VD. In the OS, software raid is enabled by md raid driver. There is no S130 related driver in OS. Please refer to S130 sections “Linux RAID” and Configuring Linux RAID” in the S130 user guide, available here - http://topics-cdn.dell.com/pdf/poweredge-rc-s130_User's%20Guide_en-us.pdf
Hope this clarifies the details. >> SWRAID Controller S130 is not supported in Linux. Hi Souvik, The support as described above was added recently. With Regards, Narendra K -----Original Message----- From: linux-poweredge-bounces-Lists On Behalf Of [email protected] Sent: Wednesday, August 24, 2016 4:32 PM To: linux-poweredge-Lists <[email protected]> Subject: Re: [Linux-PowerEdge] Dell Perc S130 Two completely opposite answers, both from Dell employees. This is really confusing and one or both of you should figure out which of you is right and set the record straight. ----- Original Message ----- From: [email protected] [mailto:[email protected]] To: [email protected],[email protected] Cc: [email protected] Sent: Tue, 23 Aug 2016 22:34:53 +0530 Subject: Re: [Linux-PowerEdge] Dell Perc S130 Dell - Internal Use - Confidential SWRAID Controller S130 is not supported in Linux. Thanks Souvik ----- Original Message ----- From: [email protected] [mailto:[email protected]] To: [email protected],[email protected] Cc: [email protected] Sent: Tue, 23 Aug 2016 15:56:41 +0000 Subject: Re: [Linux-PowerEdge] Dell Perc S130 Rich, which Linux distro are you using? RHEL 7.2 and SLES 11 SP4 and newer have PERC S130 drivers available https://access.redhat.com/downloads/content/69/ver=/rhel---7/7.2/x86_64/product-software (requires Red Hat login) https://drivers.suse.com/dell/Dell_PowerEdge_13G/sle-11-sp4-x86_64/1.0/install-readme.html Josh Moore Enterprise Master Engineer - Server Solutions, HPC/Cloud Dell | Support Services -----Original Message----- From: linux-poweredge-bounces-Lists On Behalf Of Rich Sudlow Sent: Tuesday, August 23, 2016 10:49 AM To: linux-poweredge-Lists <[email protected]> Cc: Bonenberger, Brett <[email protected]> Subject: [Linux-PowerEdge] Dell Perc S130 Can anyone from Dell tell me if there is Linux support for PERC S130? My understanding this is only supported on Windows. Any other workaround for this would be appreciated. Thanks, Rich -- Rich Sudlow University of Notre Dame Center for Research Computing - Union Station 506 W. South St South Bend, In 46601 (574) 631-7258 (office) (574) 807-1046 (cell) _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
