Hi,
Has anyone found a workaround for the /media/SECUPD leftover mount?
I ran a few dsu commands yesterday on a system and here's what it looks
like now:
$ df -P|grep media
/dev/sde 1036 0 1036 0%
/media/SECUPD
/dev/sdf 1036 0 1036 0%
/media/SECUPD_
/dev/sdg 1036 0 1036 0%
/media/SECUPD__
/dev/sdc 1036 0 1036 0%
/media/SECUPD___
/dev/sdd 1036 0 1036 0%
/media/SECUPD____
This is on RHEL6 and it's the same device which was mounted, not umounted
and re-mounted on some other directory..
Has anyone found a workaround for this? I tried writing a udev rule to
blacklist that device but couldn't get the rules to kick in (see below)
# cat 00-0dell.rules
#KERNEL=="sd*", ATTRS{vendor}=="iDRAC", ATTRS{model}=="SECUPD",
ENV{UDISKS_PRESENTATION_HIDE}="1", ENV{UDISKS_IGNORE}="1",
OPTIONS="ignore_device"
KERNEL=="sd*", ATTRS{vendor}=="iDRAC", ATTRS{model}=="SECUPD",
ATTR{authorized}="0"
SUBSYSTEM=="block", ATTRS{vendor}=="iDRAC", ATTRS{model}=="SECUPD",
ATTR{authorized}="0"
SUBSYSTEM=="block", ATTRS{vendor}=="iDRAC", ATTRS{model}=="SECUPD",
ENV{UDISKS_IGNORE}="1", OPTIONS="ignore_device"
SUBSYSTEM=="usb", ATTRS{vendor}=="iDRAC", ATTRS{model}=="SECUPD",
ATTR{authorized}="0"
SUBSYSTEM=="usb", ATTRS{vendor}=="iDRAC",
ATTRS{model}=="SECUPD",ENV{UDISKS_IGNORE}="1", OPTIONS="ignore_device"
ACTION=="add|change", SUBSYSTEM=="usb", ATTRS{vendor}=="iDRAC",
ATTRS{model}=="SECUPD", OPTIONS:="ignore_device"
ACTION=="add|change", SUBSYSTEM=="block", ATTRS{vendor}=="iDRAC"
ATTRS{model}=="SECUPD", OPTIONS:="ignore_device"
ACTION=="add|change", KERNEL=="sd*", ATTRS{vendor}=="iDRAC",
ATTRS{model}=="SECUPD", OPTIONS:="ignore_device"
KERNEL=="sd*", ATTRS{model}=="SECUPD", OPTIONS:="ignore_device"
Any ideas?
Vincent
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
