That's great, however there _are_ updates for the PERC H730 Mini, as evidenced by the minimum required firmware for OMSA 8.4.0 being 25.4.0.0011 (I think). So, why didn't dsu pick that up? Given 25.5.0018 (which I had to hunt for a linux installer for on the Dell web site) came out in
Release Date: 31 Oct 2016 Version: 25.5.0.0018 ,A08 Last Updated: 24 Nov 2016 you'd have thought it would be in the Catalog.xml, wouldn't you? So, is this a mistake on Dell's part? I'm running the below version of dsu: dell-system-update-1.3.1-16.12.00.x86_64 Ben On Thu, 19 Jan 2017, [email protected] wrote: > Dell - Internal Use - Confidential > > The --inventory option lists all available components in the system. > But without --inventory option, dsu will list only a subset of above > components which are having an update in the Catalog.xml. > > A component without an update will not be displayed or made available for > selection. > > Thanks, > Venu > > -----Original Message----- > From: linux-poweredge-bounces-Lists On Behalf Of Ben > Sent: Wednesday, January 18, 2017 6:28 PM > To: linux-poweredge-Lists <[email protected]> > Subject: [Linux-PowerEdge] dsu inconsitency > > So I have a 730xd. Hasn't been updated in a while. I moved it to OMSA > 8.4.0 and installed and ran dsu: > > [ ]1 NetXtreme BCM5720 Gigabit Ethernet PCIe (p4p1) > Current Version : 7.10.61 Upgrade to : 20.2.17 > > [ ]2 NetXtreme BCM5720 Gigabit Ethernet PCIe (p4p2) > Current Version : 7.10.61 Upgrade to : 20.2.17 > > [-]3 13G SEP Firmware, BayID: 0 > Current Version : 2.23 same as : 2.23 > > [ ]4 BIOS > Current Version : 1.3.6 Upgrade to : 2.1.7 > > [ ]5 13G Backplane Expander FW > Current Version : 3.03 Upgrade to : 3.31 > > [ ]6 Dell 32 Bit uEFI Diagnostics, version 4239, 4239A24, 4239.32 > Current Version : 4239A24 Upgrade to : 4239A33 > > [ ]7 Firmware for - Disk 24 in Backplane 1 of PERC H730 Mini Controller 0 > Current Version : VT31 Upgrade to : VT32 > > [ ]8 Firmware for - Disk 0 in Backplane 1 of PERC H730 Mini Controller 0 > Current Version : VT31 Upgrade to : VT32 > > [ ]9 iDRAC > Current Version : 2.20.20.20 Upgrade to : 2.40.40.40 > > [ ]10 BCM57800 1-Gigabit Ethernet rev 10 (em3) > Current Version : 7.12.17 Upgrade to : 08.00.30 > > [ ]11 BCM57800 10-Gigabit Ethernet rev 10 (em1) > Current Version : 7.12.17 Upgrade to : 08.00.30 > > [ ]12 BCM57800 1-Gigabit Ethernet rev 10 (em4) > Current Version : 7.12.17 Upgrade to : 08.00.30 > > [ ]13 BCM57800 10-Gigabit Ethernet rev 10 (em2) > Current Version : 7.12.17 Upgrade to : 08.00.30 > > > Oddly, the RAID card is missing. I've updated everything I could see (but > haven't rebooted yet, hence the BIOS and HDDs not showing as updated yet), > then did a "dsu --inventory". Notice what's at no.9? > > 1. OpenManage Server Administrator ( Version : 8.4.0 ) > > 2. BIOS ( Version : 1.3.6 ) > > 3. Lifecycle Controller ( Version : 2.40.40.40 ) > > 4. Dell 32 Bit uEFI Diagnostics, version 4239, 4239A33, 4239.41 ( Version : > 4239A33 ) > > 5. OS COLLECTOR 1.1, OSC_1.1, A00 ( Version : OSC_1.1 ) > > 6. Power Supply ( Version : 00.14.6D ) > > 7. Power Supply ( Version : 00.14.6D ) > > 8. CPLD ( Version : 1.0.1 ) > > 9. PERC H730 Mini Controller 0 Firmware ( Version : 25.3.0.0016 ) > > 10. Firmware for - Disk 0 in Backplane 1 of PERC H730 Mini Controller 0 ( > Version : VT31 ) > > 11. Firmware for - Disk 24 in Backplane 1 of PERC H730 Mini Controller 0 ( > Version : VT31 ) > > 12. 13G Backplane Expander FW ( Version : 3.31 ) > > 13. iDRAC ( Version : 2.40.40.40 ) > > 14. NetXtreme BCM5720 Gigabit Ethernet PCIe (p4p2) ( Version : 20.2.17 ) > > 15. NetXtreme BCM5720 Gigabit Ethernet PCIe (p4p1) ( Version : 20.2.17 ) > > 16. BCM57800 10-Gigabit Ethernet rev 10 (em2) ( Version : 08.00.30 ) > > 17. BCM57800 1-Gigabit Ethernet rev 10 (em4) ( Version : 08.00.30 ) > > 18. BCM57800 10-Gigabit Ethernet rev 10 (em1) ( Version : 08.00.30 ) > > 19. BCM57800 1-Gigabit Ethernet rev 10 (em3) ( Version : 08.00.30 ) > > 20. 13G SEP Firmware, BayID: 0 ( Version : 2.23 ) > > > I went back to dsu without "--inventory": > > [ ]1 BIOS > Current Version : 1.3.6 Upgrade to : 2.1.7 > > [-]2 NetXtreme BCM5720 Gigabit Ethernet PCIe (p4p1) > Current Version : 20.2.17 same as : 20.2.17 > > [-]3 NetXtreme BCM5720 Gigabit Ethernet PCIe (p4p2) > Current Version : 20.2.17 same as : 20.2.17 > > [-]4 13G Backplane Expander FW > Current Version : 3.31 same as : 3.31 > > [-]5 Dell 32 Bit uEFI Diagnostics, version 4239, 4239A33, 4239.41 > Current Version : 4239A33 same as : 4239A33 > > [ ]6 Firmware for - Disk 24 in Backplane 1 of PERC H730 Mini Controller 0 > Current Version : VT31 Upgrade to : VT32 > > [ ]7 Firmware for - Disk 0 in Backplane 1 of PERC H730 Mini Controller 0 > Current Version : VT31 Upgrade to : VT32 > > [-]8 iDRAC > Current Version : 2.40.40.40 same as : 2.40.40.40 > > [-]9 BCM57800 1-Gigabit Ethernet rev 10 (em3) > Current Version : 08.00.30 same as : 08.00.30 > > [-]10 BCM57800 10-Gigabit Ethernet rev 10 (em1) > Current Version : 08.00.30 same as : 08.00.30 > > [-]11 BCM57800 1-Gigabit Ethernet rev 10 (em4) > Current Version : 08.00.30 same as : 08.00.30 > > [-]12 BCM57800 10-Gigabit Ethernet rev 10 (em2) > Current Version : 08.00.30 same as : 08.00.30 > > [-]13 13G SEP Firmware, BayID: 0 > Current Version : 2.23 same as : 2.23 > > Gone again. How am I supposed to update it? Do I need to do the binary hack > at https://lists.us.dell.com/pipermail/linux-poweredge/2015-May/049784.html? > My /opt/dell/srvadmin/lib64/libstorelib.so is > /opt/dell/srvadmin/lib64/libstorelib.so.4.62-0 > > Thanks, > > Ben > -- > Unix Support, UIS, University of Cambridge, England > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > Ben -- Unix Support, UIS, University of Cambridge, England _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
