Dell - Internal Use - Confidential Hi George,
Check_dell_hw script uses the omreport storage <subcommands> currently. Also, StorCLI is not picking up the LSI controller: $ /opt/MegaRAID/storcli/storcli64 show Status Code = 0 Status = Success Description = None Number of Controllers = 0 Host Name = <redacted> Operating System = Linux2.6.32-642.11.1.el6.x86_64 Maybe lsiutil will do the trick...?? Thanks ---------------------------------------------------------------------- Message: 1 Date: Wed, 22 Mar 2017 16:14:26 +0000 From: "George Beech" <[email protected]> Subject: Re: [Linux-PowerEdge] Monitoring C6320 LSI controller ? To: [email protected], [email protected] Message-ID: <emfc04da68-8259-44de-8ef3-8de2d63bb0eb@gbeech-workhorse> Content-Type: text/plain; charset="utf-8" What does your check_dell_hw script do to check storage? What commands does it issue? ------ Original Message ------ From: [email protected] To: [email protected] Sent: 3/21/2017 2:57:08 PM Subject: [Linux-PowerEdge] Monitoring C6320 LSI controller ? >Dell - Internal Use - Confidential > > >Hi, > > > >Please can you advise on a recommended way to monitor the LSI Mezz >controller in the C6320 in Linux (RHEL) > > > >Thanks > >Simon. > > > > > >Simon Meddings > >Enterprise Solutions Consultant, ISG > >Dell EMC | UK PLC > >mobile+44 7730751185 <tel:00447730751185> > >[email protected] > > > > > > > >Still a little concerned that with these systems we cannot seemingly >monitor the storage controllers. i.e from our check_mk monitor > > > >$ ./check_dell_hw > >1 DellHW_Storage - Storage Error! No controllers found > >0 DellHW_Memory_0 - Memory module 0 [A1, 32768 MB] is Ok > >0 DellHW_Memory_1 - Memory module 1 [A2, 32768 MB] is Ok > >0 DellHW_Memory_2 - Memory module 2 [B1, 32768 MB] is Ok > >0 DellHW_Memory_3 - Memory module 3 [B2, 32768 MB] is Ok > >0 DellHW_Fan_0 - Chassis fan 0 [FAN_1] reading: 7910 RPM > >0 DellHW_Fan_1 - Chassis fan 1 [FAN_2] reading: 7910 RPM > >0 DellHW_Fan_2 - Chassis fan 2 [FAN_3] reading: 7910 RPM > >0 DellHW_Fan_3 - Chassis fan 3 [FAN_4] reading: 7910 RPM > >0 DellHW_Temp_0 - Temperature Probe 0 [CPU1 Temp] reads 45 C (min=8/3, >max=98/103) > >0 DellHW_Temp_1 - Temperature Probe 1 [CPU2 Temp] reads 41 C (min=8/3, >max=98/103) > >0 DellHW_Temp_2 - Temperature Probe 2 [Inlet Temp] reads 26 C (min=0/0, >max=42/47) > >0 DellHW_CPU_0 - Processor 0 [Intel Xeon E5-2690 v4 2.60GHz] is Present > >0 DellHW_CPU_1 - Processor 1 [Intel Xeon E5-2690 v4 2.60GHz] is Present > >0 DellHW_Voltage_0 - Voltage sensor 0 [CPU1 VCORE PG] is Good > >0 DellHW_Voltage_1 - Voltage sensor 1 [CPU2 VCORE PG] is Good > >0 DellHW_Voltage_2 - Voltage sensor 2 [System Board 3.3V PG] is Good > >0 DellHW_Voltage_3 - Voltage sensor 3 [System Board 5V PG] is Good > >0 DellHW_Voltage_4 - Voltage sensor 4 [CPU2 PLL PG] is Good > >0 DellHW_Voltage_5 - Voltage sensor 5 [CPU1 PLL PG] is Good > >0 DellHW_Voltage_6 - Voltage sensor 6 [System Board 1.1V PG] is Good > >0 DellHW_Voltage_7 - Voltage sensor 7 [CPU1 M23 VDDQ PG] is Good > >0 DellHW_Voltage_8 - Voltage sensor 8 [CPU1 M23 VTT PG] is Good > >0 DellHW_Voltage_9 - Voltage sensor 9 [System Board FETDRV PG] is Good > >0 DellHW_Voltage_10 - Voltage sensor 10 [CPU2 VSA PG] is Good > >0 DellHW_Voltage_11 - Voltage sensor 11 [CPU1 VSA PG] is Good > >0 DellHW_Voltage_12 - Voltage sensor 12 [CPU2 M01 VDDQ PG] is Good > >0 DellHW_Voltage_13 - Voltage sensor 13 [CPU1 M01 VDDQ PG] is Good > >0 DellHW_Voltage_14 - Voltage sensor 14 [CPU2 M23 VTT PG] is Good > >0 DellHW_Voltage_15 - Voltage sensor 15 [CPU2 M01 VTT PG] is Good > >0 DellHW_Voltage_16 - Voltage sensor 16 [CPU2 VTT PG] is Good > >0 DellHW_Voltage_17 - Voltage sensor 17 [CPU1 VTT PG] is Good > >0 DellHW_Voltage_18 - Voltage sensor 18 [CPU2 M23 VDDQ PG] is Good > >0 DellHW_Voltage_19 - Voltage sensor 19 [System Board 1.5V PG] is Good > >0 DellHW_Voltage_20 - Voltage sensor 20 [CPU1 M01 VTT PG] is Good > >0 DellHW_Voltage_21 - Voltage sensor 21 [Input Voltage] reads 11.970 V > >0 DellHW_Battery_0 - Battery probe 0 [System Board CMOS Battery] is >Good > >0 DellHW_Amp_0 - Amperage probe 0 [System Board Pwr Consumption] reads >104 W > >1 DellHW_Storage - Storage Error! No controllers found > > > >We might need to do something with that lsiutil thingamabob do Dell >have any recommendations ? > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20170322/974aa1f6/attachment-0001.html ------------------------------ _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge End of Linux-PowerEdge Digest, Vol 154, Issue 23 ************************************************ _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
