That's odd. I'm not sure what controller is in those. but omreport should pick it up. Are you up to date on patches and firmware for OMSA and the hardware?
------ Original Message ------ From: [email protected] To: [email protected] Sent: 3/24/2017 10:17:27 AM Subject: [Linux-PowerEdge] Monitoring C6320 LSI controller ? >Dell - Internal Use - Confidential > >Hi George, > >Check_dell_hw script uses the omreport storage <subcommands> currently. > >Also, StorCLI is not picking up the LSI controller: > >$ /opt/MegaRAID/storcli/storcli64 show >Status Code = 0 >Status = Success >Description = None > >Number of Controllers = 0 >Host Name = <redacted> >Operating System = Linux2.6.32-642.11.1.el6.x86_64 > >Maybe lsiutil will do the trick...?? > >Thanks > >---------------------------------------------------------------------- > >Message: 1 >Date: Wed, 22 Mar 2017 16:14:26 +0000 >From: "George Beech" <[email protected]> >Subject: Re: [Linux-PowerEdge] Monitoring C6320 LSI controller ? >To: [email protected], [email protected] >Message-ID: <emfc04da68-8259-44de-8ef3-8de2d63bb0eb@gbeech-workhorse> >Content-Type: text/plain; charset="utf-8" > >What does your check_dell_hw script do to check storage? What commands >does it issue? > >------ Original Message ------ >From: [email protected] >To: [email protected] >Sent: 3/21/2017 2:57:08 PM >Subject: [Linux-PowerEdge] Monitoring C6320 LSI controller ? > >>Dell - Internal Use - Confidential >> >> >>Hi, >> >> >> >>Please can you advise on a recommended way to monitor the LSI Mezz >>controller in the C6320 in Linux (RHEL) >> >> >> >>Thanks >> >>Simon. >> >> >> >> >> >>Simon Meddings >> >>Enterprise Solutions Consultant, ISG >> >>Dell EMC | UK PLC >> >>mobile+44 7730751185 <tel:00447730751185> >> >>[email protected] >> >> >> >> >> >> >> >>Still a little concerned that with these systems we cannot seemingly >>monitor the storage controllers. i.e from our check_mk monitor >> >> >> >>$ ./check_dell_hw >> >>1 DellHW_Storage - Storage Error! No controllers found >> >>0 DellHW_Memory_0 - Memory module 0 [A1, 32768 MB] is Ok >> >>0 DellHW_Memory_1 - Memory module 1 [A2, 32768 MB] is Ok >> >>0 DellHW_Memory_2 - Memory module 2 [B1, 32768 MB] is Ok >> >>0 DellHW_Memory_3 - Memory module 3 [B2, 32768 MB] is Ok >> >>0 DellHW_Fan_0 - Chassis fan 0 [FAN_1] reading: 7910 RPM >> >>0 DellHW_Fan_1 - Chassis fan 1 [FAN_2] reading: 7910 RPM >> >>0 DellHW_Fan_2 - Chassis fan 2 [FAN_3] reading: 7910 RPM >> >>0 DellHW_Fan_3 - Chassis fan 3 [FAN_4] reading: 7910 RPM >> >>0 DellHW_Temp_0 - Temperature Probe 0 [CPU1 Temp] reads 45 C (min=8/3, >>max=98/103) >> >>0 DellHW_Temp_1 - Temperature Probe 1 [CPU2 Temp] reads 41 C (min=8/3, >>max=98/103) >> >>0 DellHW_Temp_2 - Temperature Probe 2 [Inlet Temp] reads 26 C >>(min=0/0, >>max=42/47) >> >>0 DellHW_CPU_0 - Processor 0 [Intel Xeon E5-2690 v4 2.60GHz] is >>Present >> >>0 DellHW_CPU_1 - Processor 1 [Intel Xeon E5-2690 v4 2.60GHz] is >>Present >> >>0 DellHW_Voltage_0 - Voltage sensor 0 [CPU1 VCORE PG] is Good >> >>0 DellHW_Voltage_1 - Voltage sensor 1 [CPU2 VCORE PG] is Good >> >>0 DellHW_Voltage_2 - Voltage sensor 2 [System Board 3.3V PG] is Good >> >>0 DellHW_Voltage_3 - Voltage sensor 3 [System Board 5V PG] is Good >> >>0 DellHW_Voltage_4 - Voltage sensor 4 [CPU2 PLL PG] is Good >> >>0 DellHW_Voltage_5 - Voltage sensor 5 [CPU1 PLL PG] is Good >> >>0 DellHW_Voltage_6 - Voltage sensor 6 [System Board 1.1V PG] is Good >> >>0 DellHW_Voltage_7 - Voltage sensor 7 [CPU1 M23 VDDQ PG] is Good >> >>0 DellHW_Voltage_8 - Voltage sensor 8 [CPU1 M23 VTT PG] is Good >> >>0 DellHW_Voltage_9 - Voltage sensor 9 [System Board FETDRV PG] is Good >> >>0 DellHW_Voltage_10 - Voltage sensor 10 [CPU2 VSA PG] is Good >> >>0 DellHW_Voltage_11 - Voltage sensor 11 [CPU1 VSA PG] is Good >> >>0 DellHW_Voltage_12 - Voltage sensor 12 [CPU2 M01 VDDQ PG] is Good >> >>0 DellHW_Voltage_13 - Voltage sensor 13 [CPU1 M01 VDDQ PG] is Good >> >>0 DellHW_Voltage_14 - Voltage sensor 14 [CPU2 M23 VTT PG] is Good >> >>0 DellHW_Voltage_15 - Voltage sensor 15 [CPU2 M01 VTT PG] is Good >> >>0 DellHW_Voltage_16 - Voltage sensor 16 [CPU2 VTT PG] is Good >> >>0 DellHW_Voltage_17 - Voltage sensor 17 [CPU1 VTT PG] is Good >> >>0 DellHW_Voltage_18 - Voltage sensor 18 [CPU2 M23 VDDQ PG] is Good >> >>0 DellHW_Voltage_19 - Voltage sensor 19 [System Board 1.5V PG] is Good >> >>0 DellHW_Voltage_20 - Voltage sensor 20 [CPU1 M01 VTT PG] is Good >> >>0 DellHW_Voltage_21 - Voltage sensor 21 [Input Voltage] reads 11.970 V >> >>0 DellHW_Battery_0 - Battery probe 0 [System Board CMOS Battery] is >>Good >> >>0 DellHW_Amp_0 - Amperage probe 0 [System Board Pwr Consumption] reads >>104 W >> >>1 DellHW_Storage - Storage Error! No controllers found >> >> >> >>We might need to do something with that lsiutil thingamabob do Dell >>have any recommendations ? >> >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20170322/974aa1f6/attachment-0001.html > >------------------------------ > >_______________________________________________ >Linux-PowerEdge mailing list >[email protected] >https://lists.us.dell.com/mailman/listinfo/linux-poweredge > >End of Linux-PowerEdge Digest, Vol 154, Issue 23 >************************************************ > >_______________________________________________ >Linux-PowerEdge mailing list >[email protected] >https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
