Forgot to mention the OS - RHEL7.4; ipmitool-1.8.18-5.el7.x86_64 On Thu, Nov 16, 2017 at 12:39 PM, Dan Yasny <[email protected]> wrote:
> Hi all, > > After the great help I received here yesterday, I have high hopes for this > one as well > > I have enabled IPv6 on a set of iDRACs, and can ping6 them or ssh into > them using the v6 address. > > However, ipmitool fails to connect completely. Below are some command > outputs using ipv4 and ipv6 addresses of the same DRAC (R320/iDRAC7-ENT in > this case): > > $ ping -6 2620:52:0:13b8:46a8:42ff:fe3b:235f > PING 2620:52:0:13b8:46a8:42ff:fe3b:235f(2620:52:0:13b8:46a8:42ff:fe3b:235f) > 56 data bytes > 64 bytes from 2620:52:0:13b8:46a8:42ff:fe3b:235f: icmp_seq=1 ttl=64 > time=0.911 ms > 64 bytes from 2620:52:0:13b8:46a8:42ff:fe3b:235f: icmp_seq=2 ttl=64 > time=0.514 ms > > $ ping 10.19.184.37 > PING 10.19.184.37 (10.19.184.37) 56(84) bytes of data. > 64 bytes from 10.19.184.37: icmp_seq=1 ttl=64 time=0.755 ms > 64 bytes from 10.19.184.37: icmp_seq=2 ttl=64 time=0.488 ms > > $ ipmitool -I lanplus -H 10.19.184.37 -U root -R 3 -N 5 -P calvin power > status > Chassis Power is on > > $ ipmitool -I lanplus -H 2620:52:0:13b8:46a8:42ff:fe3b:235f -U root -R 3 > -N 5 -P calvin power status > Error: Unable to establish IPMI v2 / RMCP+ session > > ^^ this after waiting for a minute or so, so something is definitely > happening > > > ssh root@2620:52:0:13b8:46a8:42ff:fe3b:235f > root@2620:52:0:13b8:46a8:42ff:fe3b:235f's password: **** > /admin1-> > /admin1-> > > In short, I do have connectivity, but I wonder whether there's something > else to enable on the iDRAC, to allow ipmi over ipv6 > > Thanks, > Dan > >
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
