Hi All,We see some strange behavior of our M640 blades. The iDRAC is resetting due to a watchdog. We did not initiate anything. Have any of you seen this before? And if so what did you do to fix this?
2018-03-21T08:25:13+01:00 Successfully logged in using root, from 192.168.136.134 and redfish. 2018-03-20T21:38:22+01:00 FlexAddress is enabled on all NIC and FC HBA devices.
2018-03-20T21:37:56+01:00 System CPU Resetting.2018-03-20T21:37:53+01:00 iDRAC to CMC communication link is not functioning for agent free monitoring of chassis PCIe slots.
2018-03-20T21:37:47+01:00 System is turning on. 2018-03-20T21:21:22+01:00 System is turning off. 2018-03-20T21:21:22+01:00 System CPU Resetting. 2018-03-20T21:21:05+01:00 Requested system hardreset.2018-03-20T21:21:05+01:00 Internal error has occurred check for additional logs. 2018-03-19T21:46:40+01:00 The iDRAC IP Address changed from 0.0.0.0 to 192.168.136.99.
2018-03-19T21:46:33+01:00 iDRAC time is set using Network Time Protocol. 2018-03-19T21:46:33+01:00 The previous log entry was repeated 1 times.2018-03-19T20:46:15+01:00 FlexAddress is enabled on all NIC and FC HBA devices.
2018-03-19T20:46:07+01:00 Auto Discovery feature disabled.2018-03-19T20:46:04+01:00 The iDRAC firmware was rebooted with the following reason: watchdog. 2018-03-19T05:29:35+01:00 The iDRAC IP Address changed from 0.0.0.0 to 192.168.136.99.
2018-03-19T05:29:25+01:00 iDRAC time is set using Network Time Protocol. 2018-03-19T05:29:25+01:00 The previous log entry was repeated 1 times.2018-03-19T04:29:10+01:00 FlexAddress is enabled on all NIC and FC HBA devices.
2018-03-19T04:28:58+01:00 Auto Discovery feature disabled.2018-03-19T04:28:55+01:00 The iDRAC firmware was rebooted with the following reason: watchdog. 2018-03-18T10:55:06+01:00 The iDRAC IP Address changed from 0.0.0.0 to 192.168.136.99.
2018-03-18T10:54:56+01:00 iDRAC time is set using Network Time Protocol. 2018-03-18T10:54:56+01:00 The previous log entry was repeated 1 times.2018-03-18T09:54:42+01:00 FlexAddress is enabled on all NIC and FC HBA devices.
2018-03-18T09:54:30+01:00 Auto Discovery feature disabled. -- Met vriendelijke groeten / Kind regards, Jaap P. Dijkshoorn | Cluster Computing | SURFsara | https://www.surfsara.nl | | Science Park 140 | 1098 XG Amsterdam | Phone: +31208001300 | | email:jaap.dijksho...@surfsara.nl | skype:jaap.dijksho...@surfsara.nl |
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
