Dell - Internal Use - Confidential Hello,
Can you give a try to import using OMSA 9.1.0 consoles and let us know how it goes out. (if you are still on this) http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverid=X820W Thanks Vivek ---------------------------------------------------------------------- Message: 1 Date: Wed, 3 Jan 2018 21:25:47 -0500 (EST) From: [email protected] To: Patrick Boutilier <[email protected]> Cc: [email protected] Subject: Re: [Linux-PowerEdge] Unable to move single-disk RAID-0 LD/HD between servers.. Message-ID: <alpine.LRH.2.21.1801032122420.671@daltigoth.lasthome.solace.krynn> Content-Type: text/plain; charset=US-ASCII; format=flowed This is getting more and more confusing but at least the drive imported fine when I stopped specifying the Foreign Configuration # in my MegaCli args... (check the difference between the two -Import commands) # MegaCli -CfgForeign -Dsply 0 -a0 Foreign configuration 0 on controller 0: Number of DISK GROUPS: 1 DISK GROUP: 0 Number of Spans: 1 SPAN: 0 [......] # MegaCli -CfgForeign -Import 0 -a0 FW does not have Security key, create Security key first. Failed to import foreign configuration 0 on controller 0. FW error description: The requested command has invalid arguments. # MegaCli -CfgForeign -Import -a0 Foreign configuration is imported on controller 0. Grumble.. Vincent On Wed, 3 Jan 2018, Patrick Boutilier wrote: > On 01/03/2018 07:48 PM, [email protected] wrote: >> >> On Wed, 3 Jan 2018, Patrick Boutilier wrote: >> >>> Did you try using the Ctrl-R interface during boot instead of >>> MegaCLI after boot? I have always had success importing foreign configs >>> that way. >> >> Hi Patrick, >> No, I did not try that. I'll do on the next iteration (tonight). >> Would storcli have worked any better? Perhaps that'd be a reason to >> ditch megacli since it has not been updated in ages.. >> >> Rebooting a host to import RAID LD's in a hot-swap config is quite a >> pain, IMHO. This worked just fine for me in the past using LSI HBA's >> (9271-8i) but it seems these PERC are a little more touchy.. >> >> Vincent > > Oh, didn't realize Server 2 was booted when you moved drives over. Not > sure about storcli but there is a perccli from 2015 available from > Dell. Might be able to do something with that. > > > [root@vs07 plugins]# /opt/MegaRAID/perccli/perccli64 -v > > PercCli SAS Customization Utility Ver 1.17.10 October 21, 2015 > > (c)Copyright 2015, AVAGO Corporation, All Rights Reserved. > > Exit Code: 0x00 > > [root@vs07 plugins]# rpm -qf /opt/MegaRAID/perccli/perccli64 > perccli-1.17.10-1.noarch > ------------------------------ Message: 2 Date: Thu, 4 Jan 2018 06:53:32 -0500 From: R S <[email protected]> To: [email protected] Subject: [Linux-PowerEdge] QLogic/Cavium/Broadcom BCM57800 FW update kills all ports Message-ID: <cadtu-kkaoehzkpg8btgeak3ht7evppucq0fxmtrp0x+uw5e...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" It's a 4 port NDC. 2 ports run copper 1 Gbit/s the other 2 ports are 10 GBit/s FiberOptic w/ SFPs. Original FW was v10.01.00 ( http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=7N5GW ) Updated FW to the one they just just released: v14.02.12 ( http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=WT7KK ) Booted SLI v2.2 ISO over iDRAC with the usual procedure of creating an image of the two FW files, mounting the image, then copying over the files to Desktop. chmod +x * and then exeuted FW update. 3 issues now: a) LC can't show Current FW Version Inventory anymore and errors out (SWC0055). http://topics-cdn.dell.com/pdf/dell-opnmang-sw-v8.0.1_Reference%20Guide_en-us.pdf doesn't show any helpful pointers. ?b) all 4 ports fail in the ePSA c) no port activity lights Card shows during POST, so it's not hard-bricked. Card shows in iDRAC inventory. Reseated cables, but does no good. Anyone else experiencing this? Going to reseat the card, drain flea power and the whole shebang, and maybe try to either re-apply the FW or downgrade to 10.01.00 again. Guess I have to open a ticket w/ DELL. -- Tech III * AppControl * Endpoint Protection * Server Maintenance Buncombe County Schools Technology Department Network Group ComicSans Awareness Campaign <http://comicsanscriminal.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20180104/dcc8a0cf/attachment-0001.html> ------------------------------ Message: 3 Date: Thu, 4 Jan 2018 12:58:15 +0100 From: Malte Schmidt <[email protected]> To: [email protected] Subject: Re: [Linux-PowerEdge] dsu catalog version 17.11.01-MYDTM would like to downgrade the lifecycle-controller from 1.7.5.4 to 1.6.5.12 Message-ID: <[email protected]> Content-Type: text/plain; charset="utf-8" Hello, this is still the case. Is anyone aware? Regards On 11/30/17 17:56, Malte Schmidt wrote: > I noticed there was an update to the dsu-catalog: > > ??? Aktualisiert dsucatalog-17.11.00-39K12.noarch > @dell-system-update_independent ??? Update????????????????? > 17.11.01-MYDTM.noarch @dell-system-update_independent > > So I updated the package and ran dsu, but for a reason I don't know it > would like to downgrade the lifecycle-controller: > > [ ]1 Dell LifeCycle Controller v1.7.5, 1.7.5.4, A00 Current Version : > 1.7.5.4 Downgrade to : 1.6.5.12, Criticality : Recommended > > I am experiencing this with a fully patched CentOS 6 as of today. > > Regards > > > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20180104/7a363a11/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: 0xFF379C0C.asc Type: application/pgp-keys Size: 37572 bytes Desc: not available URL: <http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20180104/7a363a11/attachment.bin> -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20180104/7a363a11/attachment.sig> ------------------------------ Subject: Digest Footer _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge ------------------------------ End of Linux-PowerEdge Digest, Vol 164, Issue 6 *********************************************** _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
