[EXTERNAL EMAIL]
Hi,
while testing I just noticed this issue could have been lurking longer
because dsu gives a wrong exit code.
I usually run --non-interactive --apply-upgrades with ansible (no
inventory) and if that run has updates that apply successfully and need
a reboot it will give back 8, even though it should come back with 26
for a partial failure and needing a reboot for the successful updates.
So that may have hidden the error from me because I only check output on
failures :)
Greetings
Klaas
On 16.01.20 10:46, Ben Argyle wrote:
[EXTERNAL EMAIL]
Hi Klaas,
That's a good spot on the new addition to the blacklist. Thank you very much
for that!
A similar, but not identical QLogic-identification thing cropped up a while ago
for us (I forget exactly when, but I think it was less than 12 months ago) and
Dell issued a fix that appeared in the next catalog. It's a PCI ID mismatch, I
think.
As for the "BROADCOM" error. We've always seen that when running dsu. It
appears to be harmless.
Ben
-----Original Message-----
From: Linux-PowerEdge <[email protected]> On Behalf Of Klaas
Demter
Sent: 16 January 2020 08:20
To: linux-poweredge <[email protected]>
Subject: [Linux-PowerEdge] DSU Problems with 19.12.02 and 20.01.00 release
[EXTERNAL EMAIL]
Hi,
it seems there is a problem with dsu and latest inventory collection.
It detects a QLogic adapter in my rhel 7.7 system, I only have intel
adapters. For the Dell employees: There is a support request open with
Dell associated with my name.
There is an error in messages:
"BROADCOM[8562]: ERROR InitInternalData(): read configuration failed(21)"
Side note: if you're using multipathd see this addition to the
blacklist configuration:
https://bugzilla.redhat.com/show_bug.cgi?id=1380272#c31
DSU output of inventory:
# dsu --inventory
DELL EMC System Update 1.7.0
Copyright (C) 2014 DELL EMC Proprietary.
Verifying catalog installation ...
Installing catalog from repository ...
Fetching dsucatalog ...
Reading the catalog ...
Fetching invcol_HW0HN_LN64_20_02_00_771_A00 ...
Verifying inventory collector installation ...
Getting System Inventory ...
warning: Inventory collector returned with partial failure.
1. BIOS, BIOS ( Version : 2.4.8 )
2. Application, Lifecycle Controller ( Version : 4.00.00.00 )
3. Application, Dell 64 Bit uEFI Diagnostics, version 4301, 4301A34,
4301.35 ( Version : 4301A34 )
4. Firmware, Integrated Dell Remote Access Controller ( Version : 4.00.00.00 )
5. Application, OS COLLECTOR, 3.0, A00 ( Version : 3.0 )
6. Application, iDRAC Service Module Embedded Package, v3.4.0, A00 (
Version : 3.4.0 )
7. Firmware, System CPLD ( Version : 1.1.3 )
8. Firmware, Power Supply ( Version : 00.23.32 )
9. Firmware, Power Supply ( Version : 00.23.32 )
10. Firmware, Firmware for - Disk 0 in Backplane 1 of PERC H330
Adapter Controller 0 in Slot 6 ( Version : EE05 )
11. Firmware, PERC H330 Adapter Controller 0 Firmware ( Version : 25.5.6.0009 )
12. Firmware, Intel(R) Ethernet 10G 4P X550/I350 rNDC ( Version : 19.0.12 )
13. Firmware, Intel(R) Ethernet 10G 4P X550/I350 rNDC ( Version : 19.0.12 )
14. Firmware, Intel(R) Gigabit 4P X550/I350 rNDC ( Version : 19.0.12 )
15. Firmware, Intel(R) Gigabit 4P X550/I350 rNDC ( Version : 19.0.12 )
16. Firmware, Intel(R) Ethernet 10G 2P X550-t Adapter ( Version : 19.0.12 )
17. Firmware, Intel(R) Ethernet 10G 2P X550-t Adapter ( Version : 19.0.12 )
18. Firmware, Intel(R) Ethernet 10G 2P X550-t Adapter ( Version : 19.0.12 )
19. Firmware, Intel(R) Ethernet 10G 2P X550-t Adapter ( Version : 19.0.12 )
20. Firmware, QLogic QLE2692 Adapter ( Version : 15.00.00 )
21. Firmware, QLogic QLE2692 Adapter ( Version : 15.00.00 )
22. Firmware, QLogic QLE2692 Adapter ( Version : 15.00.00 )
23. Firmware, QLogic QLE2692 Adapter ( Version : 15.00.00 )
24. Firmware, SEP Firmware, BayID: 1 ( Version : 4.32 )
Exiting DSU!
Greetings
Klaas
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
