Hi Stefan, I've not ran into this, but I have a noticed with dsu last week that a recent iDrac upgrade has been withdrawn.
[ ]21 iDRAC Current Version : 4.40.00.00 Downgrade to : 4.32.20.00, Criticality : Recommended, Type : Firmware Kind regards, Onno Op 16-05-2021 19:38 heeft Linux-PowerEdge namens Stefan M. Radman <linux-poweredge-boun...@dell.com namens s...@kmi.com> geschreven: Hi, Recently I upgraded a T630 from iDRAC firmware version 2.75.75.75 to 2.80.80.80. After the upgrade the web interface no longer worked. The web client received an empty reponse from port 80/tcp as well as 443/tcp. Over SSH the iDRAC was still reachable (and showed version 2.80.80.80). Neither "racadm racreset soft" nor "racadm racreset hard” helped. Finally I used racadm to roll back to the previous versions 2.75.75.75 and the web interface started working again. Has anyone experienced the same? Does anyone have a solution to the issue? Thanks Stefan CONFIDENTIALITY NOTICE: This communication may contain privileged and confidential information, or may otherwise be protected from disclosure, and is intended solely for use of the intended recipient(s). If you are not the intended recipient of this communication, please notify the sender that you have received this communication in error and delete and destroy all copies in your possession. _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge