Paras pradhan schrieb: > [r...@tst1 ~]# racadm config -g cfgSerial -o cfgSerialSshEnable 1 > ERROR: RACADM is unable to process the requested subcommand because there is > no > local RAC configuration to communicate with. > > Local RACADM subcommand execution requires the following: > > 1. A Remote Access Controller (RAC) must be present on the managed server > 2. Appropriate managed node software must be installed and running on the > server > > > I am really stuck here. Any one having the similar problem?
Either your rac card has locked up - this is a reoccurring issue in all drac[3-5] and is the cause of real grief - or you do not have a rac card at all. The only way to recover a locked up rac card is to pull the power plug of the server for one minute - remeber it usually has two of them. This usually recovers them. Rainer _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
