Howdy, I'm attempting to update the firmware on a PE 2950 running CentOS 5.3 x86_64.
I mount the ISO (after cat'ing both ISO files together) # mount -t iso9660 -o loop /root/OM_6.1.0_SUU_A00.iso /mnt # cd /mnt # ./autorun.sh The inventory ran and indicated several components to update, I did so and was told to reboot: Mon Jul 20 11:37:23 CDT 2009 RAC_FRMW_LX_R209365.BIN - update successful Mon Jul 20 11:37:23 CDT 2009 PE2950_BIOS_LX_2.6.1.BIN - reboot required to complete update Mon Jul 20 11:37:23 CDT 2009 NETW_FRMW_LX_R214709.BIN - reboot required to complete update Mon Jul 20 11:37:23 CDT 2009 RAID_FRMW_LX_R189337.BIN - reboot required to complete update Mon Jul 20 11:37:23 CDT 2009 BMC_FRMW_LX_R202152.BIN - update successful Following the reboot, I run the autorun.sh the GUI will get stuck at 76% during the Collecting Inventory Information. I've let it sit for 2 hours without any change. Attempted another reboot followed by running the autrun.sh again and still it sticks at 76% In fact following the reboot, collecting inv inf jumps immediately to 76%, is this information cached somewhere? Maybe deleting the cache and allowing inv inf collection to start from scratch might solve this? Thanks for any info, Mike _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
