PERC 6/I uses the MegaSAS driver. SAS 6/iR uses the mptsas driver. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andreas Ntaflos Sent: Wednesday, July 29, 2009 1:52 PM To: linux-poweredge-Lists Subject: Re: SAS 6/iR Adapter and Debian Lenny: Driver version is out of date.
On Tuesday 28 July 2009 08:28:38 Alex Mestiashvili wrote: > Hello , > I had the same problem on r610 . It is possible to compile mptsas >driver for lenny kernels (>2.6.19) if you take driver version >4.18.00.00 from LSI site . > here is an article : > http://blog.loftninjas.org/2009/06/05/lsi-mptlinux-mptsas-31229-on-ub >untu/ Regards , > Alex Unfortunately this did nothing for the driver versions of my PERC 6/i controller. Following the instructions I could build and install the newer version of the mptsas module and checking with "modinfo mptsas" confirms that it worked as advertised on btm's blog. However "omreport storage controller" still reports State : Degraded Driver Version : 00.00.03.20-rc1 Minimum Required Driver Version : 00.00.03.21 Did I miss anything here or does that procedure simply not apply to the PERC 6/i controllers? Andreas -- Andreas Ntaflos Vienna, Austria GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4 _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
