For the record,  we have at SARA have also problems with omsa 6.1 and
6.0.1. We do not run a unsupported OS debian. With 6.0.1 we have crashes
and the daemons does not clean up the sempahores properly so we can not
start the daemons any more before the sem keys are destroyed.

6.1 does not start at all as mentioned in a previous email.

Regards


Simon Luff wrote:
> Hi Jeff,
> 
> We've performed some tests here and I can confirm that using the 6.0.2 
> repository is not a successful work-around for this defect.
> 
> [r...@openvz8 ~]# rpm -q srvadmin-all
> srvadmin-all-6.0.1-800
> [r...@openvz8 ~]# omreport
> /usr/bin/omreport: line 5: 20725 Segmentation fault 
> /etc/delloma.d/oma/bin/omcliproxy omreport "$@"
> 
> Do you have any other suggestions?
> 
> Could you please describe how Dell are attempting to resolve this issue. 
> Would you please provide whatever tracking URLs are appropriate for 
> following progress with this critical bug.
> 
> best regards,
> Simon.
> 
> On 08/18/2009 08:28 PM, [email protected] wrote:
>> Simon,
>>
>> If you wish, you can configure your R710s (or all your servers for that
>> matter) to the http://linux.dell.com/repo/hardware/OMSA_6.0.2/ repo.
>> This has:
>>
>> OM 6.0.2 for R410, T410
>> OM 6.0.1 for R610, R710, T610, M610, M710
>> OM 5.5   for all other supported servers
>>
>> -Jeff
>>
>>> We have an installed base of 2950s and we've worked around
>>> the issue  by continuing to run OMSA 5.5. Our newest batch of
>>> servers are r710s and the dell repos don't offer OMSA 5.5 for
>>> these, and require us to use OMSA 6.1.
>>>
>>> best regards,
>>> Simon.
> 
> 


-- 
********************************************************************
*  Bas van der Vlies                    e-mail: [email protected]       *
*  SARA - Academic Computing Services   Amsterdam, The Netherlands *
********************************************************************

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

Reply via email to