Is it just to type: dkms install? Or what ist he correct command? Von: [email protected] [mailto:[email protected]] Gesendet: Donnerstag, 27. August 2009 15:54 An: [email protected]; [email protected] Betreff: RE: driver update problem Dkms doesn't install storage drivers by default. You need to explicitly run the dkms install command to add them to the initrd. From: [email protected] [mailto:[email protected]] On Behalf Of Rene Rosenberger Sent: Thursday, August 27, 2009 8:43 AM To: linux-poweredge-Lists Subject: driver update problem Hi, does anyone know why the new driver isnt loaded after a system restart? xxxxxxxx:~ # dkms status megaraid_sas, v00.00.03.21: added xxxxxxxx:~ # modinfo megaraid-sas filename: /lib/modules/2.6.25.5-1.1-default/kernel/drivers/scsi/megaraid/megaraid_sas. ko description: LSI MegaRAID SAS Driver author: [email protected] version: 00.00.03.16-rc1 license: GPL srcversion: 7B4E044729438F1BDAA27CB alias: pci:v00001028d00000015sv*sd*bc*sc*i* alias: pci:v00001000d00000413sv*sd*bc*sc*i* alias: pci:v00001000d00000060sv*sd*bc*sc*i* alias: pci:v00001000d00000411sv*sd*bc*sc*i* depends: scsi_mod supported: yes vermagic: 2.6.25.5-1.1-default SMP mod_unload parm: poll_mode_io:Complete cmds from IO path, (default=0) (int) regards, Rene
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
