On 03/17/2017 11:13 PM, Michael Richardson wrote:
Woody Wu <narkewo...@gmail.com> wrote:
> I want to setup pppd to connect a Linux laptop to an embedded Linux
> device. The Linux box connected to a rs-232 to rs485 converter, then
> the convert connected via a two-wire rs-485 cable to the embedded Linux
> device's rs-485 port.
Depending upon what you really want to do (is it run ppp? Or is it, get IP
connectivity?), you may want to look at:
https://datatracker.ietf.org/doc/draft-ietf-6lo-6lobac/
There is some userspace code out there from Carsten I think.
Michael, the 6lobac you mentioned looks exactly what I needed. But it
looks a quite new standard and no a real implementation on Linux or
Windows, right?
--
] Never tell me the odds! | ipv6 mesh networks [
] Michael Richardson, Sandelman Software Works | network architect [
] m...@sandelman.ca http://www.sandelman.ca/ | ruby on rails [
--
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
