Am 05.05.2019 19:57, schrieb Marco d'Itri:
> On May 05, walter harms <wha...@bfs.de> wrote:
>
>> I was using PPPOE on a raspi and it terminated with "invalid value",
> Which raspi model and which distribution, exactly?
>
raspi3 with raspian (it was for testing, only)
I tried also different kernels but no success.
>> while the same setup on x86_64 worked fine.
> Is your pppd configuration unusual in any way?
>
not really, but i need a VLAN (eth0.7)
this is the line i used for testing, it includes everything.
/usr/bin/setsid /usr/sbin/pppd pty '/usr/sbin/pppoe -p
/var/run/pppoe.conf-pppoe.pid.pppoe -I eth0.7 -T 80 -U -m 1412' noipdefault
noauth
default-asyncmap defaultroute hide-password nodetach mtu 1492 mru 1492 noaccomp
nodeflate nopcomp novj novjccomp user xxxxx lcp-echo-interval 20
lcp-echo-failure 3
>> is anyone working with PPPOE ?
> I use pppd and the PPPoE plugin from Debian 9 on a 32 bit armv7l system
> (i.e. armhf) and it works fine.
>
