On Wed, 10 Mar 1999, [WINDOWS-1257] Rimantas �ylius wrote:
|i have established ppp on ttyS0 connection to my ISP through USR courier
|everything, works perfect.
|
|But when i try to connect on ttyS1 with Zyxel isdn modem, i get
|connection, see pap autentication, then receive local ip number and see
|remote ip. routing table looks o.k. everything looks the same as for
|normal courier modem.
|Strange thing, that when I configure the same isdn modem with WinNT4.0 -
|everything works.
|
|the problem is --- nothing works. i can no ping, anything. where should
|i look for problems?
Try adding the pppd option "asyncmap 0" if you don't already have it. This
has worked for some Zyxel owners. There might be a communication failure
after the ppp negotiations finish and the ACCM (Asyncronous Control
Character Map - the asyncmap setting) is one of the things that can cause
it. Another thing is a speed restriction at some point in the data flow
that causes a buffer to overflow. Check the speed of /dev/ttyS1 and the
/dev/ttyS1 UART speed and configuration relative to that needed for IDSN.
---
Clifford Kite Not a guru. (tm)
[EMAIL PROTECTED] Not even close.
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
