> I have been trying to setup EQL on my Redhat (RH5.2, kernel 2.2.7, ppp
> 2.3.7) box and have had nothing but bad luck. I am down to thinking
> that I don't properly have VJ header compression turned off. I use
> netcfg to set up the interfaces and there is an entry for 'PPP Options:'
> that I put novj in. All this does is makes the entry PPPOPTIONS=novj in
> the file /etc/sysconfig/network-scripts/ifcfg-ppp0. The debug output is
> the same whether I add this option or not. Here is a sample of the
> output:
>
> Serial connection established.
> Using interface ppp0
> Connect: ppp0 <--> /dev/ttyS1
> sent [LCP ConfReq id=0x1 <mru 576> <asyncmap 0x0> <magic 0xc7482e6b>
> <pcomp> <accomp>]
> sent [LCP ConfReq id=0x1 <mru 576> <asyncmap 0x0> <magic 0xc7482e6b>
> <pcomp> <accomp>]
> rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x11e08064> <pcomp>
> <accomp> <auth pap>]
> sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x11e08064> <pcomp>
> <accomp> <auth pap>]
> sent [LCP ConfReq id=0x1 <mru 576> <asyncmap 0x0> <magic 0xc7482e6b>
> <pcomp> <accomp>]
> rcvd [LCP ConfAck id=0x1 <mru 576> <asyncmap 0x0> <magic 0xc7482e6b>
> <pcomp> <accomp>]
> sent [PAP AuthReq id=0x1 user=" -edited-
> rcvd [PAP AuthAck id=0x1 "Login Succeeded"]
> Remote message: Login Succeeded
> sent [IPCP ConfReq id=0x1 <addr 10.0.0.1>]
> rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr 208.157.20.250>]
> sent [IPCP ConfRej id=0x1 <compress VJ 0f 00>]
> rcvd [IPCP ConfNak id=0x1 <addr 208.157.20.41>]
> sent [IPCP ConfReq id=0x2 <addr 208.157.20.41>]
> rcvd [IPCP ConfReq id=0x2 <compress VJ> <addr 208.157.20.250>]
> sent [IPCP ConfRej id=0x2 <compress VJ>]
> rcvd [IPCP ConfAck id=0x2 <addr 208.157.20.41>]
> rcvd [IPCP ConfReq id=0x3 <addr 208.157.20.250>]
> sent [IPCP ConfAck id=0x3 <addr 208.157.20.250>]
> local IP address 208.157.20.41
> remote IP address 208.157.20.250
> Script /etc/ppp/ip-up started; pid = 2249
> Script /etc/ppp/ip-up finished (pid 2249), status = 0x0
>
> The lines that have <compress VJ... are the ones that I _think_ tell me
> that the compression is turned on. These never go away. FWIW, if I put
> something in that entry form that isn't in the pppd options list (like
> NOVJ for example...uppercase), it immediately reports a list of some
> available options in the console and refuses to dial, so I suspect that
> it is not choking on having the novj option there.
>
> Can someone please help me get this VJ turned off? It has to be the
> only thing keeping me from getting this EQL working. Thanks.
> --
Your VJ compresion IS turned off. Note, that other peer is asking
about VJ (RCVD=received Config request about VJ, and your side ALWAYS
ANSWERS "NO WAY" = ConfRej = Config. REJECTED !!!
What else you want? Both sides agreed finally to not use VJ. That's
normal, if other side try to set up VJ, but your side disagreed. Or
you believe, that if you don't want VJ, other sides know it and even
don't try to establish it??? RTFM
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
