> Poor Mike wrote:
>
> > Hi guys
> > I've got one interesting and unbelievable problem.
> > I have two bootable partitions under LILO (Win98 and Linux).
> > {
> > Begin:
> > When I boot Win after working with Linux (kppp, pppd) Win
> > says "New PNP modem found" and starts to configure it.
> > After that everything is working....until
> > goto Begin;
>
> goto?
I meant that it runs in some kind of cycle and I haven't any exit().
Win and Linux are working, but.... you may read from Begin :o)
Everytime when Win starts after Linux it has to configure modem (as PNP
device).
It's a little annoying and I can't understand:
1 Why does Win think that modem is new device?
2 Where can modem store information?
(I think that Win takes information from modem's registers, but
what's register)
3 What do I have to do for solving?
>
> >
> > }
> > My modem is USR 33.6. Init string under Linux is the same
> > that under Win and default for hardware flow control "ATZ4"
> > I have not ideas Why, Where and What.
> >
> > Cheers.
> > Mike.
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
> > the body of a message to [EMAIL PROTECTED]
>
> --
> mailto:[EMAIL PROTECTED] <=> RICK MARSHALL <=>
http://www.herzfeld.com.au/isl
> International Software Laboratories Pty Limited - Australia, New
Zealand
> Footwear: Retail Management, Point of Sale, Wholesale, Manufacturing
> (-: All in Linux :-) (-: On the Web :-) (-: All in UNIBASE 5GL :-)
>
>
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
