On Mon, 6 Dec 1999, Michael B Golden wrote:
|On Sun, 5 Dec 1999 13:55:11 -0600 (CST) Clifford Kite <[EMAIL PROTECTED]>
|writes:
|>
|>The message that often signals an IRQ conflict comes earlier when pppd
|>tries to get the serial port attributes, but I think checking the IRQ
|>would be worthwhile in this instance.
|
|As I don't know how to interpret what it says, I will post it here:
|
|/proc/interrupts:
| CPU0
| 0: 16956 XT-PIC timer
| 1: 160 XT-PIC keyboard
| 2: 0 XT-PIC cascade
| 5: 0 XT-PIC soundblaster
| 8: 1 XT-PIC rtc
| 13: 0 XT-PIC fpu
| 14: 25843 XT-PIC ide0
|NMI: 0
There's no serial port so the modem wasn't being used. What IRQ does the
modem use? setserial /dev/ttySx, for whatever x you use, will show the
configuration of the device file. If the configured IRQ is one of the ones
above then you have a conflict. If it is not one of those but is not the
one your modem uses then all you need to do is change the boot-up file that
configures the device file, also using setserial. Here the bootup file is
/etc/rc.d/rc.serial.
---
Clifford Kite Not a guru. (tm)
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
