Hi, I have some problems starting and stopping pppd using the network
configuration scripts.

The problems raised when upgrading to RedHat 6.1. Using pppd version
2.3.10. For the ppp-link in question I use an external Eicon Diva T/A

It would be nice if you can give me a clue!

My syslog says:

Apr 18 17:48:41 trollveggen pppd[1488]: Exit.
Apr 18 17:48:41 trollveggen kernel: ppp: channel ppp0 closing.
Apr 18 17:48:41 trollveggen kernel: ppp0 released
Apr 18 17:48:41 trollveggen kernel: ppp0: ccp closed
testmelding for /usr/sbin/pppd -detach  ttyS1 115200 lock modem crtscts
defaultroute 193.69.86.20:195.139.139.195 name mkretsisdn remotename
eunet debug ipparam ppp0 call isp linkname ppp0 connect /usr/sbin/chat
-v  -f  /etc/sysconfig/network-scripts/chat-ppp0
Apr 18 17:48:50 trollveggen ifup-ppp: pppd started for ppp0 on ttyS1 at
115200
Apr 18 17:48:50 trollveggen pppd[1798]: pppd 2.3.10 started by root, uid
0
Apr 18 17:48:50 trollveggen pppd[1798]: Using interface ppp0
Apr 18 17:48:50 trollveggen pppd[1798]: local  IP address 193.69.86.20
Apr 18 17:48:50 trollveggen pppd[1798]: remote IP address
195.139.139.195


Stopping and starting network:

[root@trollveggen sysadm]# /etc/rc.d/init.d/network stop
Shutting down interface eth0                               [  OK  ]
Shutting down interface ppp0                               [FAILED]
Disabling IPv4 packet forwarding                           [  OK  ]
Disabling IPv4 automatic defragmentation                   [  OK  ]
[root@trollveggen sysadm]# /etc/rc.d/init.d/network start
Enabling IPv4 packet forwarding                            [  OK  ]
Bringing up interface lo                                   [  OK  ]
Bringing up interface eth0                                 [  OK  ]
Bringing up interface ppp0 Failed to activate ppp0, retrying in the
background
                                                           [FAILED]

dmesg output:

Linux version 2.2.12-20 ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 17 19:37:23
MEST 2000
Detected 200459959 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 399.77 BogoMIPS
Memory: 62596k/65536k available (1188k kernel code, 412k reserved, 996k
data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.

Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb580
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00)
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
Real Time Clock Driver v1.09
ISDN subsystem Rev: 1.87/1.74/1.92/1.54/1.17/1.2
RAM disk driver initialized:  16 RAM disks of 4096K size
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x6000-0x6007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x6008-0x600f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPB3043ATU, ATA DISK drive
hdc: NEC CD-ROM DRIVE:282, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MPB3043ATU, 4125MB w/256kB Cache, CHS=525/255/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :   304.419 MB/sec
   p5_mmx    :   364.998 MB/sec
   8regs     :   218.694 MB/sec
   32regs    :   161.925 MB/sec
using fastest function: p5_mmx (364.998 MB/sec)
scsi : 0 hosts.
scsi : detected total.
PPP: version 2.3.10 (demand dialling)
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.3a (module)
HiSax: Layer1 Revision 2.36
HiSax: Layer2 Revision 2.20
HiSax: TeiMgr Revision 2.13
HiSax: Layer3 Revision 2.10
HiSax: LinkLayer Revision 2.35
HiSax: Approval certification valid
HiSax: Approved with ELSA Quickstep series cards
HiSax: Approval registration numbers:
HiSax: German D133361J CETECOM ICT Services GmbH
HiSax: EU (D133362J) CETECOM ICT Services GmbH
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: HFC-PCI driver Rev. 1.20
HiSax: HFC-PCI card manufacturer: CCD/Billion/Asuscom card name: 2BD0
HFC-PCI: defined at mem 0xc4864000 fifo 0xc2798000(0x2798000) IRQ 10 HZ
100
HFC_PCI: resetting card
HFC 2BDS0 PCI: IRQ 10 count 0
HFC 2BDS0 PCI: IRQ 10 count 1
HiSax: DSS1 Rev. 2.19
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0x6200,  00:10:4b:06:6e:73, IRQ
11
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 786d.
  MII transceiver found at address 0, status 786d.
  Enabling bus-master transmits and whole-frame receives.
registered device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
begin:vcard 
n:Str�ms�yen;Hans
x-mozilla-html:FALSE
org:Mikrokrets AS
version:2.1
email;internet:[EMAIL PROTECTED]
tel;fax:+ 47 22630909
tel;work:+ 47 22642283, + 47 22641010
adr;quoted-printable:;;=D8stre Aker vei 99=0D=0AP.O.Box 31, =D8kern;Oslo;;N-0508;Norway
x-mozilla-cpt:;0
fn:Hans Str�ms�yen
end:vcard

Reply via email to